Marvin Haaby posted an answer for this 2002 Ford SVT Focus:
"The 2000 Ford Focus has the Zetec engine, I believe. On the Zetec, the camshaft timing..."
Marvin Haaby posted an answer for this Ford Cars & Trucks:
"The 2000 Ford Focus has the Zetec engine, I believe. On the Zetec, the camshaft timing..."
Marvin Haaby posted an answer for this Ford Cars & Trucks:
"The 2000 Ford Focus has the Zetec engine, I believe. On the Zetec, the camshaft timing..."
Marvin Haaby posted an answer for this 1998 Ford Expedition:
"Well that kind of sounds like a bad connection, but it was difficult understanding with no..."
Marvin Haaby posted an answer for this Cars & Trucks:
"Well first off I would check all fuses. Second task would be to trace the wires to each..."
Marvin Haaby posted an answer for this 2001 Ford Explorer Sport:
"PO171 means the engine is running lean(that means that the engine is getting too much..."
Marvin Haaby posted an answer for this 1987 Ford Bronco:
"Try checking the timing and compression."
Marvin Haaby posted an answer for this 2006 Ford Freestar:
"I think you're talking about the piston that pushes the brake onto the rotor? If so, there..."
Marvin Haaby posted an answer for this 2002 Ford Taurus:
"What's wrong? If it's not working, the first thing I would check is the speed sensor -..."
Marvin Haaby posted an answer for this 2007 Ford Edge SEL:
"Your speed sensor is giving out I believe. The transmission is fine, I'm very sure of it...."
Marvin Haaby posted an answer for this 2001 Ford Windstar:
"As long as you're not pumping out white smoke from the tailpipe or losing coolant, then..."
Marvin Haaby posted an answer for this 1993 Ford Crown Victoria:
"First find the 2 coolant hoses that lead to the firewall in the engine bay. Disconnect..."
Marvin Haaby posted an answer for this Ford Cars & Trucks:
"I've personally seen weird gauges, and other odd things happening in cars that have low..."
Marvin Haaby posted an answer for this 2001 Ford Explorer Sport:
"Need more detail.... It could be not getting fuel, no spark, no compression, or timing is..."
Marvin Haaby posted a question about 2000 Hyundai Accent:
"About 10 months ago I bought this car to attempt and rebuild the transmission. (Had no..."
Marvin Haaby posted an answer for this 1997 Ford Contour:
"There's a few reasons you could be having this problem. Fuel pump, injectors, something..."
Marvin Haaby posted an answer for this 1997 Ford Contour:
"engine died,won't start ,pulled air cleaner, no fule getting into carb."
Marvin Haaby posted an answer for this 1996 Ford Contour:
"Do you mean the actual signals on the body of the car? Or the indicators in the dash? If..."
Marvin Haaby posted an answer for this 1996 Ford Contour:
"turn signal lights won't work,clicking noise from steering column"
Marvin Haaby posted an answer for this 2000 Ford Contour:
"My guess would be dirty fuel tank. Possibly clogged fuel pump strainer."
Marvin Haaby posted an answer for this 2000 Ford Contour:
"2000 contour hesitates badly only at 1/4 tank of gas or less. 2.5 engine"
Marvin Haaby posted an answer for this 1998 Ford Contour:
"Below your dash inside the cab(not sure if passenger or driver side), should be your..."
Marvin Haaby posted an answer for this 1998 Ford Contour:
"1998 ford contour. cannot find fuse for radio, domelight, and clock"
Marvin Haaby posted an answer for this 1996 Ford Contour:
"Not at all. Your serpentine belt is in the same area as the timing belt, however is NOT..."
Marvin Haaby posted an answer for this 1996 Ford Contour:
"timing belt broke on 1996 Contour; sepentine belt replaced only 3 yrs. ago - related?"
Marvin Haaby posted an answer for this 1996 Ford Windstar:
"Agreed with solution #2"
Marvin Haaby posted an answer for this 1996 Ford Windstar:
"Will a transmission out of a1996 ford windstar LX work in a 1996 windstar GL"