1Love to sew
Ellen Den Dulk posted an answer for this PfaFF Creative 7570:
"I also have the same problem, I have not used the embroidery unit for a very long time. ..."
Ellen Den DulkEllen Den Dulk posted a question about Sewing Machines:
"When I received the machine, it would not run, only buzz, when I depressed the foot pedal...."
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Omega 6147 Sewing Machine:
"I am searching for similar answers and the answer above seems extreme. I would think its..."
Ellen Den DulkEllen Den Dulk posted an answer for this PfaFF Creative 7570:
"I don't know of any web video, but you may have simply forgotten a step. Guide the thread..."
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Brother XL-5130 Mechanical Sewing Machine:
"When you look at the sewing machine needle, there is a flat side on the shank (top part of..."
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Brother XL-2600:
"Pull both bottom and top thread to the back of the machine for about 10 cm or 4 inches out..."
Ellen Den DulkEllen Den Dulk posted an answer for this Brother XL-2600:
"the needle comes unthreaded when machine is started brother 2600 I"
Ellen Den DulkEllen Den Dulk posted an answer for this Baby Lock Imagine:
"It sounds like you the thread is passing a place with a burr, it could be in the needle..."
Ellen Den DulkEllen Den Dulk posted an answer for this Husqvarna Sewing Machines:
"my needle assembly is touching a thing that it shoudl not when the needle assembly is in..."
Ellen Den DulkEllen Den Dulk posted an answer for this Husqvarna Sewing Machines:
"Did the needle screw (also called thumb screw) become loose and the needle dropped?..."
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Necchi 6015 Mechanical Sewing Machine:
"Go to http://allynint.com/ Get the phone number off the web and call them, they have what..."
Ellen Den DulkEllen Den Dulk posted an answer for this Necchi 6015 Mechanical Sewing Machine:
"i have an Necchi and omega sewing machine the model is 6022. I need a bobbin case that..."
Ellen Den DulkEllen Den Dulk posted an answer for this Janome Memory Craft 10000:
"On some of my machines, they are not Janome, when I put the feed dogs back up, they will..."
Ellen Den DulkEllen Den Dulk posted an answer for this Janome Memory Craft 10000:
"Janome 423S the feed dogs wont come back up"
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Haier TQW200 Iron:
"There is a tube of some solution that you can buy at the sewing/fabric store, maybe even a..."
Ellen Den DulkEllen Den Dulk posted an answer for this Haier TQW200 Iron:
"I love my Haier TQW200 Iron. A friend was using it and something burned onto the..."
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Necchi 3101 Mechanical Sewing Machine:
"Perhaps you have a bent needle? Change the needle, make sure the size of the needle..."
Ellen Den DulkEllen Den Dulk posted an answer for this Necchi 3101 Mechanical Sewing Machine:
"I have model 3101FA. The needle jams and does not extend into the bobbin area, somethimes..."
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Singer 5062 Mechanical Sewing Machine:
"My mom took the bobbin housing apart to clean teh machine but never put it back together...."
Ellen Den DulkEllen Den Dulk posted an answer for this Singer 5062 Mechanical Sewing Machine:
"What I had missed was the little silver plate that is needed to keep the black plastic..."
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Brother MFC 240C All-In-One InkJet Printer:
"I replaced the cayan ink cartridge, and it says there is no cartridge installed. I bought..."
Ellen Den DulkEllen Den Dulk posted an answer for this Brother MFC 240C All-In-One InkJet Printer:
"I recently had the same thing. I did buy an original ink cartridge, but I rebooted the..."
Ellen Den DulkEllen Den Dulk posted an answer for this Sewing Machines:
"That sounds like a Necchi, if so go to www.allynint.com and order a new manual."
Ellen Den DulkEllen Den Dulk posted an answer for this PfaFF Hobby 4260:
"And when the fabric is thick, you can help the machine by putting some thick fabric behind..."
Ellen Den DulkEllen Den Dulk posted an answer for this Necchi Sewing Machines:
"I could not think of another way then free-motion sewing. Drop the feed dogs, and put a..."
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Janome L-344 Mechanical Sewing Machine:
"If the top thread looks normal and the bottom thread "loops", it means that the top thread..."
Ellen Den DulkEllen Den Dulk posted an answer for this Kenmore Sewing Machines:
"Sometimes there is a lot of lint build-up in the feed dog, it may want to move, but it..."
Ellen Den DulkEllen Den Dulk posted an answer for this Singer Sewing Machines:
"when you have bunching on the bottom, you have a problem with the top thread: no tension...."
Ellen Den DulkEllen Den Dulk posted an answer for this Husqvarna Viking 1:
"re insert the needle, maybe you did not put the needle up as far as it is to go. Make sure..."
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Yamata FY14U4AD:
"maybe you have a bent needle? and the looper cannot catch the loop the thread makes when..."
Ellen Den Dulk
Ellen Den Dulk posted an answer for this Kenmore Drop-In Bobbin 16231 Mechanical Sewing Machine:
"Check to see if the feed dogs are up, maybe you somehow clicked or switched a button, it..."
Ellen Den Dulk
Sewing Machines 23 answers
Office Equipment &... 1 answer
Irons 1 answer
