EBC ELECTRONICS posted an answer for this B&K Reference 7250 5-Channel Amplifier:
"Typically you need an preamplifier between your tv and amplifier. you run one optical..."
EBC ELECTRONICS posted an answer for this Denon AVR 2808Ci Receiver:
"First you need to check standby power supply- i think the small transformer is gone as..."
EBC ELECTRONICS posted an answer for this Onkyo TX-SR576 7 Channels Receiver:
"bad soldering joints inside the receiver or faulty speaker relay."
EBC ELECTRONICS posted an answer for this Denon Avr-5800 Home Theater 7.1 Channel Surround Receiver Processor 200 Watts:
"new board is not available. you need to find a parts unit in ebay."
EBC ELECTRONICS posted an answer for this Sony Str-Se501 Stereo Receivers:
"this is a hardware problem you need to open the receiver and check all channels, one of..."
EBC ELECTRONICS posted an answer for this Denon AVR-1612 5.1-Ch A/V Home Theater w/ 3D:
"I would log in to network router and check there."
EBC ELECTRONICS posted an answer for this Denon AVR-1802 Receiver:
"May be wrong setup- try to reset to factory default setting. if doe snot help you have a..."
EBC ELECTRONICS posted an answer for this Denon AVR-1802 Receiver:
"you can not do this. this option is no available."
EBC ELECTRONICS posted an answer for this Audio Players & Recorders:
"usually the problem can be solved by replacing bad rca cables but it could be also an..."
EBC ELECTRONICS posted an answer for this Audio Players & Recorders:
"if your turntable has an integrated amplifier you connect it directly to any regular input..."
EBC ELECTRONICS posted an answer for this Bose V25 Theater System:
"1. replace battery in the remote control 2. check if the remote works. Take any video..."
EBC ELECTRONICS posted an answer for this Adcom GTP870HD Amplifier:
"Bad front panel circuit board. Check ebcelectronics.com for more info and repair."
EBC ELECTRONICS posted an answer for this Adcom GFA-5802 2-Channel Amplifier:
"It should run hot to touch at idle, about 120F, because it is MOSFET type amplifier."
EBC ELECTRONICS posted an answer for this Velodyne CHT-15 Subwoofer:
"send your plate amplifier in for repair to velodyne or to ebcelectronics"
EBC ELECTRONICS posted an answer for this Adcom GTP-870HD 7.1-Channel Amplifier:
"check ebcelectronics.com they have flt rate service for that model."
EBC ELECTRONICS posted an answer for this Marantz SR-7000 Receiver:
"the receiver is ok. it is telling you that CD is assigned to digital #2 input,..."
EBC ELECTRONICS posted an answer for this Denon AVR-1708 Receiver:
"1. the problem is dsp (digital surround processing) board. need to replace it.2. to get..."
EBC ELECTRONICS posted an answer for this Adcom GFR-700HD 7.1 Channels Receiver:
"just check www.ebcelectronics.com they can repair your receiver. Here is a link to GFR-700..."
EBC ELECTRONICS posted an answer for this Denon AVR-589 Receiver:
"my subwoofer input is not working!"
EBC ELECTRONICS posted an answer for this Denon AVR-589 Receiver:
"Check that the front speakers are set as "small" in speaker setup menu and sub="yes". let..."
EBC ELECTRONICS posted an answer for this Vizio L32 32 in. LCD HDTV:
"color is too purple"
EBC ELECTRONICS posted an answer for this Vizio L32 32 in. LCD HDTV:
"could be bad connection at lvds cable. also some old (first lcd) TVs can get purplish..."
EBC ELECTRONICS posted an answer for this Mitsubishi WT-42313 42" Rear Projection HDTV-Ready Television:
"need to adjust red gun projector"
EBC ELECTRONICS posted an answer for this Mitsubishi WT-42313 42" Rear Projection HDTV-Ready Television:
"simple adjustment can be done by screen pot, accessible after removing front cover. more..."
EBC ELECTRONICS posted an answer for this Adcom GFA-7500 5-Channel Amplifier:
"I received an ADCOM7500 as a gift, I do not know how to use it on the input side. Can I..."
EBC ELECTRONICS posted an answer for this Adcom GFA-7500 5-Channel Amplifier:
"Good gift. It is a 5 channel power amplifier and I do not recommend to connect any sources..."