Kirk Thompson posted an answer for this 2000 Suzuki GZ 125 Marauder:
"Try draining the transmission oil, then in neutral and the back tire elevated slowly..."
Kirk Thompson posted a question about Toyota Cars & Trucks:
"how to adjust throttle kick down cable for '89 Camry 4 cyl"
Kirk Thompson posted a question about Cars & Trucks:
"changing the starter"
Kirk Thompson posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"Don't try it's a huge pain. Put very hot water into the tank and hold the handle switch..."
Kirk Thompson posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"The Hoover model 800 has seperate brush assembly to do grout. The 500 model (yours) has..."
Kirk Thompson posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"Can't do it. The machine vacuums in both scrub and pick-up. Sorry. Kirk Thompson San..."
Kirk Thompson posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"No fuses. The only thing in the circuit is the switch, so it's probably that. Good-luck...."
Kirk Thompson posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"They lock into that blue arm with the two holes in it. The erm is plastic and has the..."
Kirk Thompson posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"If you mean the footswitch that shifts from wet to dry, trun the machine over with the..."
Kirk Thompson posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"What Knob do you mean? Kirk Thompson San Juan, PR"
Kirk Thompson posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"There are no belts. If it makes the noise with the brush assembly removed the motor drive..."
Kirk Thompson posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"With the drive assembly removed it is a black rectangle with a black piece extending down..."
Kirk Thompson posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"There is a black shaft with a black circular arm at a right angle to the shaft. The black..."