1
jnftoth posted an answer for this 1995 Jeep Wrangler:
"with engine off, have someone turn the steering wheel back and forth. Check under the hood..."
jnftoth
jnftoth posted an answer for this 1999 Ford F150 Regular Cab:
"I'm not a ford guy, but I know fords have a fuel switch that trips off when you get into..."
jnftoth
jnftoth posted an answer for this 1998 Chevrolet C1500:
"check freon pressure. if freon is low, pump wont even kick on. It can appear electrical."
jnftoth
jnftoth posted an answer for this 1990 Ford F350:
"Most pinion nuts don't have a published torque spec. they are to be tightened until the..."
jnftoth
jnftoth posted an answer for this 1997 Dodge Ram 1500 Club Cab:
"I've found that autozone.com is really helpful with diagrams... enter your vehicle info,..."
jnftoth
jnftoth posted an answer for this 1997 Jeep Wrangler:
"If a 6cyl, from the front of engine, loosen the idler pulley with a 15mm wrench. It's on..."
jnftoth
jnftoth posted an answer for this 2005 Nissan Altima:
"Not sure exactly, but check in the trunk on the driver side wall. You may need to pull..."
jnftoth
jnftoth posted an answer for this 2009 Jeep Wrangler:
"Check your owners manual. The 97-06 jeeps have an option to override the clutch safety..."
jnftoth
jnftoth posted an answer for this 2000 Jeep Wrangler:
"I have a 97, and my fuse for that is behind the glovebox. Open the box, slide the end of..."
jnftoth
jnftoth posted an answer for this 2006 Jeep Wrangler:
"Jeep's transfer case output is poor for lifts over 2-3 inches. A transfer case drop should..."
jnftoth
jnftoth posted an answer for this 2005 Jeep Wrangler:
"hey, kinda late but, I would check the track bar. With engine running, have someone turn..."
jnftoth
jnftoth posted an answer for this 2004 Jeep Wrangler:
"Check your track bar (panhard bar as some call it). It goes from the driver side frame to..."
jnftoth
Cars & Trucks 12 answers
