EXPERIENCE is the best teacher!
Jay Henderson posted an answer for this Cars & Trucks:
"Do the motors have enough torque to open the headlights? Have someone turn switch on in..."
Jay Henderson posted an answer for this 2004 Toyota Sienna:
"i am a technician and i will get to the root cause of the problem... There is a recall..."
Jay Henderson posted an answer for this Mitsubishi WD-62528 62 in. LCD Television:
"picture is very dark, brightness control has no affect at all"
Jay Henderson posted an answer for this Mitsubishi WD-62528 62 in. LCD Television:
"Most likely your lamp is going bad.. Replace the lamp with a new one. The part # should..."
Jay Henderson posted an answer for this Hitachi Televison & Video:
"could you tell me why the picture keeps going off but the sound stays on but when i switch..."
Jay Henderson posted an answer for this Hitachi Televison & Video:
"FIRST question to be asked is where did you purchase your set? If it was Sams or Cosco...."
Jay Henderson posted an answer for this Televison & Video:
"CC was always on and working fine then yesterday everything worked fine on our Sony Wega..."
Jay Henderson posted an answer for this Televison & Video:
"I recommend turning on the cc "on" in the cable box and see if that helps you out. Let me..."
Jay Henderson posted an answer for this NEC Showcase Series HT1000 Multimedia Projector:
"I have tried the fn f8 keys and still if it is showing on the projecter its not on the..."
Jay Henderson posted an answer for this NEC Showcase Series HT1000 Multimedia Projector:
"Usually you have to hit the F8 key 2 or 3 times in a row to see it change sequentially...."
Jay Henderson posted an answer for this 2005 Yamaha TW 200:
"We want to lower a Yamaha TW 200 for one of our riders who has a 26 inch inseam. We are..."
Jay Henderson posted an answer for this 2005 Yamaha TW 200:
"You should be able to slide the front forks down in the tripleclamp about 2" up front. In..."
Jay Henderson posted an answer for this Televison & Video:
"I am working on a pioneer plasma ddp433pu, After replacing the power supply i got an error..."
Jay Henderson posted an answer for this Televison & Video:
"No, what this code is telling you is that you need the box that runs the set .... The..."
Jay Henderson posted an answer for this Mitsubishi VS-60609 60" Rear Projection Television:
"i lost my remote, now i cant turn tv on"
Jay Henderson posted an answer for this Mitsubishi VS-60609 60" Rear Projection Television:
"Keep in mind, there is a power button front of set also. But, if you want to use a remote,..."
Jay Henderson posted an answer for this kawasaki Motorcycles:
"Usually the air/fuel mixture screws have a brass cap on them! The only way to get to them..."
Jay Henderson posted an answer for this kawasaki Motorcycles:
"carburettor burbling. If the air mixture is wrong how do I adjust and where do I locate..."
Jay Henderson posted an answer for this 1994 kawasaki ZXR 750:
"How old is battery? Usually this isn't an issue if the thing starts and runs, but it could..."
Jay Henderson posted an answer for this 1994 kawasaki ZXR 750:
"93 zx7 idols well and revs up out of gear but it wont rev in gear"
Jay Henderson posted an answer for this Sharp Aquos LC-42D62U 42 in. LCD HDTV:
"tirned on our sharp Aquos HD tv this morning and all channels have vertical lines through..."
Jay Henderson posted an answer for this Sharp Aquos LC-42D62U 42 in. LCD HDTV:
"Suspect video processing board or driver board for that section of the panel. Recommend..."
Jay Henderson posted an answer for this 2008 Suzuki GSX-R 600:
"This sounds like heavy duty springs in the clutch. Just have to get used to it. I suspect..."
Jay Henderson posted an answer for this 2008 Suzuki GSX-R 600:
"I recently purchased a new 09 GSXR 600. Everything is fine except the clutch lever seems..."
Jay Henderson posted an answer for this 1997 Suzuki RGV 250 SP:
"My 98 model rgv won't go faster then 70kmh and it's losing power only doing 4000rpm at..."
Jay Henderson wrote a tip for Sony KP-46WT500 46" Rear Projection HDTV-Ready Television:
"If your picture looks 3D then you most likely have a CONVERGENCE IC that is bad or a fuse..."