Whirlpool Washing Machines - Page 2 - Answered Questions & Fixed Issues
Whirlpool washer spin cycle drum banging on side
Well you have done everything that you can do and expertly tested and diagnosed. The problem is doing all the towels together. The only way to fix is mix towels with other laundry or buy a front loader because the tumbling action evens out the load better.
10/1/2023 6:02:28 PM •
Whirlpool...
•
Answered
on Oct 01, 2023
•
56 views
Washer somehow got into "control locked" mode and
Hello Shane, welcome to FixYa.
Based on your information posted..."control locked" mode and I do not know how to unlock it" ...this is a fairly common problem with these washers (including Whirlpool, Kitchen Aid, Maytag, Amana, (some)Kenmore to name a few built by Whirlpool) I hear about both on-line and doing on-site service.
The solution, however is usually pretty simple. As long as your washer is indeed the Whirlpool GHW9150 give this a try and let me know how it goes.
Press and hold the "END OF CYCLE /CYCLE SIGNAL" button as you count to 15...this will reset the control.
Good luck. Let me know how you make out as I said and if I can help you in any manner going forward I will do whatever I can.
Thank you for choosing FixYa. Please take a moment to rate the info provided here and a testimony on your experience here at FixYa today is appreciated.
Regards,
Macmarkus :)
Whirlpool duet washer sport ht - error codes
FYI: The pump cleanout is located on the front of the machine, bottom right corner. There are only three screws holding the bottom cover on. It is easy to get to if you prop it up a few inches off the ground. Just thought this would be helpful as I just did this as of 5 min ago. Should take 10 min. or less.
Pause mode stuck
Is the door firmly closed? Open the door and close it firmly. If the pause button is really stuck, you will need to repair/replace the board.
Can you wash shoes in a Whirlpool duet washing machine front end
It is generally not recommended to wash shoes, especially athletic or sports shoes, in a front-loading washing machine like the Whirlpool Duet. While the washing machine may be capable of handling the physical task of washing shoes, there are a few reasons why it is not advisable:
- Potential Damage: Shoes often have components like rubber soles, delicate fabrics, or other materials that can be damaged or deformed in the washing machine. The mechanical action of the machine, along with the detergent and water, can cause excessive wear, tear, or even disintegration of the shoe materials.
- Machine Damage: Washing shoes in a machine can cause imbalances, leading to excessive vibrations or damage to the machine's drum or other components. This can result in the machine not functioning properly or requiring repairs.
- Residue and Odor: Shoes may contain dirt, mud, or other substances that can leave residue in the washing machine. This residue can build up over time, affecting the cleanliness and performance of subsequent laundry loads. Additionally, some shoes may have strong odors that can transfer to the machine and impact future laundry.
6/28/2023 4:36:40 AM •
Whirlpool...
•
Answered
on Jun 28, 2023
•
34 views
Whirlpool Commercial Washer CAE2745FQ coin operated machine won't turn on. We changed the price and put it back together and now it won't turn on when the coins fall into the coin box. HELP!
If your Whirlpool Commercial Washer CAE2745FQ coin-operated machine won't turn on after changing the price and reassembling it, here are a few troubleshooting steps you can try:
- Check the power supply: Ensure that the washer is properly connected to a functioning power outlet. Verify that the power cord is securely plugged in and that there is power at the outlet. If the outlet is controlled by a switch, make sure the switch is turned on.
- Examine the coin mechanism: Double-check that the coin mechanism is correctly installed and aligned. Ensure that all connections and wires are securely attached. Sometimes, a loose or improperly connected coin mechanism can prevent the washer from starting.
- Inspect the door switch: The door switch is a safety feature that prevents the washer from operating when the door is open. Make sure that the door is fully closed and latched properly. If the door switch is faulty or not engaging correctly, it may need to be replaced.
- Check for error codes or resets: Some commercial washers have error code displays or reset procedures. Refer to the washer's manual or documentation to see if there are any error codes displayed or if there is a specific reset process you need to follow.
- Test the control panel and switches: Ensure that the control panel buttons and switches are functioning properly. Check if any buttons or switches are stuck or unresponsive. If necessary, clean the control panel and switches to remove any dirt or debris that may be affecting their operation.
- Contact professional assistance: If none of the above steps resolve the issue, it is recommended to contact Whirlpool's customer support or a qualified technician who specializes in commercial laundry equipment. They will have the necessary expertise and tools to diagnose and repair the specific issue with your coin-operated washer.
6/18/2023 5:30:52 PM •
Whirlpool...
•
Answered
on Jun 18, 2023
•
59 views
Not finding what you are looking for?