Weller Welding Tools - Page 8 - Popular Questions, Answers, Tips & Manuals
Rewireing a handle
black goes to gold white to silver well guess you know where green goes now
Tinning tips
Flux the tip, heat the iron, apply solder all over the tip and wipe, while hot, the solder off with fine steel wool.
If the solder is flux core, no need for additional flux
Good Luck
Replacing tip
i have an old 8200 and i just bend the ends of the replacement tip, then i just tighten the bolts. that is how the tip was on the when i bought the 8200. cheers
Soldering gun troubleshoot
# Never touch the tip of the soldering gun.
They are very hot and will give you a nasty burn.
# Take great care to avoid touching the mains flex with the tip of the gun.
The gun should have a heatproof flex for extra protection. An ordinary plastic flex will melt immediately if touched by a hot gun and there is a serious risk of burns and electric shock.
# Always return the soldering gun to its stand when not in use.
Never put it down on your workbench, even for a moment!
# Work in a well-ventilated area.
The smoke formed as you melt solder is mostly from the flux and quite irritating. Avoid breathing it by keeping you head to the side of, not above, your work.
Deltaweld 350 with help 700 code ?
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwiJm8Xqtq6DAxUvrokEHSvtAyUQFnoECA4QAQ&url=https%3A%2F%2Fwww.fixya.com%2Fsupport%2Ft29927508-deltaweld_350_help_100_code&usg=AOvVaw1Zz2ud-ECJTvyBdf5Zm-bJ&opi=89978449
6/8/2023 2:51:53 PM •
Welding Tools
•
519 views • 0 helpful votes
My Vulcan 220 welder want come on
Hi,
please for damaged wires, check that a technician has blown out dust from the rear portion of your welder after dust has been removed and double check that you've cleaned the exterior within the last 2 months.
Thank you.
11/2/2022 2:51:35 PM •
Welding Tools
•
47 views • 0 helpful votes
Miller 325 EFI welder motor won't start. seems like fuel delivery issues.
Likely fuel delivery i.e. low fuel pressure at the injectors.
Causes;
Low fuel
Fuel filter plugged
Fuel supply line plugged
Lift fuel pump - insufficient fuel supply
Fuel pump (lift or module) - internally plugged
Pressure regulator not functioning properly
Minimum module (injector) pump voltage is 7VDC measured at the pump. The unit requires a battery with sufficient charge to provide cranking current to the starter and feed the fuel pump (lift and/or module).
Once running, the charging system must provide sufficient current to maintain a battery voltage in excess of 13VDC. Less than 13VDC implies failing charging system and/or battery.
1/8/2022 10:34:46 PM •
Welding Tools
•
1,053 views • 1 helpful votes
Not finding what you are looking for?