Ultrak Watches - Recent Questions, Troubleshooting & Support
Alarm
Go into the set mode from the alarm. You will be prompted with alarm off/on. To momentarily turn it off pressing one or any button usually does that.
Why will my ultrak not upload to my hytek
Hello there,
First of all, when you connect the device to the computer does the computer read the device? If it does, then it means the computer is reading the device.
Now, the next thing to check for is if you already have the software of the device on the computer, if you do not, then you will have to get the disc and install it on the computer as that is how the computer will be able to download anything on the device.
If not, it will not download anything for you.
Hope this information helped.
Goodluck
Elect_Comp
The print mode is stuck
Hi.
Remove the internal battery and put it back in place after one minute. That will reset the stopwatch completely. If that does not work, that means that there is an internal fault. Look for stuck button, if there is none, call the phone number listed on the instruction to have the unit repaired.
Regards.
Not finding what you are looking for?