Toyota Recent Questions, Troubleshooting Help & Support

Before you buy a new (very expensive) catalytic converter have you had the O2 sensors in the exhaust system checked? These can sometimes trigger the same trouble code and are a lot less expensive to replace. Often it is the 'Downstream' O2 sensor causing the issue. (The one positioned after the catalytic converter). Usually as long as you get one that is specific to the exhaust on your vehicle it will be the correct one. If it is the stock exhaust buy the one for that exhaust and it should be the correct one.

If you do, not only is it ******* but the sensors will detect a leak and the MIL lamp will stay illuminated.

The 'Upstream' sensor is normally the one nearest the engine, before the catalytic converter. The 'Downstream' sensor is the one furthest away from the engine after the catalytic converter, usually underneath the vehicle. Another useful bit of information is on a 'V' engine if you stand with the engine belts and pulleys nearest to you and the transmission furthest away, Bank One is commonly the Left side and Bank Two is the right side.

Hi Joe Yes, it is EGR Valve. Did you clear the code? https://www.google.com/search?q=1996+Toyota+Corolla+1.6++P0401 What about the IAC? https://www.google.com/search?q=1996+toyota+corolla+1.6+iac+valve What are the plugs like? It is something simple. ..

What sort of help does it need? https://www.google.com/search?q=Fujitsu+Ten+pzq60-00041 ..

I would contact the AA or RAC or even a locksmith. Any other comment would be inappropriate as there may be a car theif looking for a way in.

It appears to be some type of aftermarket device, Remote Start, Aftermarket Alarm? They are always troublesome. Help in the link. https://www.google.com/search?q=PROOE4BS ..

For the Toyota Nadia with the 3S-FSE-D4 engine, you can find the fan belt and A/C belt using the following specifications:

1. Fan Belt:
- The fan belt for the 3S-FSE-D4 engine should have the following specifications, which you can use to find a replacement:
- Part Number: 90916-02400
- Dimensions: 6PK1955 (6 ribs, 1955mm length)

2. A/C Belt:
- The A/C belt for the 3S-FSE-D4 engine should have the following specifications:
- Part Number: 99364-20840
- Dimensions: 5PK1060 (5 ribs, 1060mm length)

When replacing the belts, it's important to ensure that they are installed with the correct tension to prevent any high pitched noises or premature wear. If the belts are making a high pitched noise, it could indicate either wear or improper tension. It's recommended to inspect the belt tensioner and pulleys for any signs of wear or damage while replacing the belts.

Additionally, it's a good practice to check for any misalignment of the pulleys as this could also cause excessive noise and premature wear on the belts. Once the new belts are installed, check the tension according to the manufacturer's specifications to ensure proper operation and minimize noise. If the noise persists after belt replacement, further inspection of the A/C compressor and other related components may be necessary.

Some possibilities:

• Low or weak battery or charging system issue (rule that out 1st)
• Faulty starter or solenoid, or circuit issues affecting the starter
• Faulty fuel pump or issue in the fuel system

See this photo I am attaching.

Question edited for clarity. Question moved to model category. Here are the Fuse Box Diagrams

Toyota Previa 1995 Pin Fuse Box/Block Circuit Breaker ...

CarFuseBox https://www.carfusebox.com > toyota-previa-1995-pin... Apr 15, 2023 - Toyota Previa 1995 Pin Fuse Box/Block Circuit Breaker Diagram ; 1, Relay Heater ; 2, Relay Heater ; 3, (Headlamp) Relay Light ; 4, Relay Engine Oil.

Fuse Box Diagram Toyota

Fuse Box Diagrams https://fuse-box.info > Home > Toyota Fuse box diagrams (location and assignment of electrical fuses and relays) Toyota Previa (1995, 1996, 1997). Toyota Prius (XW11; 2000-2003)...> ...

Toyota Estima Previa 2G fuse and relay

FuseAndRelay.com https://fuseandrelay.com > toyota > estima-previa Designation of fuses and relays Toyota Estima Previa 2nd generation, locations of control units and their diagrams. Cigarette lighter fuse. ..

In the Toyota Coaster 4x4 with the BB58 4.1-liter engine, the engine number is typically located on the engine block itself. The exact location can vary slightly depending on the model year and specific configuration, but it's commonly stamped onto a flat surface on the side or top of the engine block. To find it, you may need to open the hood and visually inspect the engine block. Look around the sides and top for a series of alphanumeric characters stamped into the metal. The engine number is usually a combination of letters and numbers and may be preceded or followed by the term "Engine No." or "Eng No." If you're having trouble locating it, consulting the vehicle's owner manual or contacting a Toyota dealership or service center for assistance could be helpful. They may be able to provide you with more precise instructions or even visual aids to help you locate the engine number.

It seems like there may be a removed in your message. In the event that you're searching for a manual for the Toyota RS2000 series sewing machine, you can take a stab at reaching Toyota Sewing straightforwardly or really looking at their authority site for downloadable manuals. On the other hand, you could find sewing machine manual data sets online that could have the data you really want.

This code refers to the front passenger airbag. There is a fault in the that part of the system so you will need to get a airbag specialist to look at it as soon as you can. Remember this is a safety feature on the vehicle so DON'T ignore it.

LF mirror transmission reverse gear circuit malfunction.An issue with the transmission, similar to the GM vehicles.

Question edited for a lot more clarity and spelling of model. Question moved to model category. Take the old one off. Take the wrong one and the right one to the shop and get the correct one for the model. Don't mess around trying to modify 60 amps of electrical power on an item that doesn't fit and isn't right for the vehicle. https://www.google.com/search?q=1997+toyota+camry+2.2+starter+wiring+diagram ..

Question edited for clarity. Please include 'year make model' as well as engine type and cc. Question moved to Toyota. Whenever you are doing something that involves TDC (you don't say WHAT you are doing), not only must cylinder 1 be on TDC, but it must also be on the firing stroke with both inlet and exhaust valves closed. Anything you want to know is on google and YouTube https://www.google.com/search?q=2.0+1RZ ..

in the fuse block ( looks like a box of squares) near the battery

Hello Joe Clean the Throttle Body and MAF. Check for codes. Other ideas and videos here https://www.google.com/search?q=1996+Toyota+Corolla+1.6+stumbles+on+acceleration ,,