Toshiba Televison & Video - Page 7 - Recent Questions, Troubleshooting & Support
Only sound and No picture in Toshiba DVD/VCR combo
Hello,
maybe your connections are wrong.
The yellow pin is for video, while the white and red pin are for audio left and right.
So, your wires will be connected to video and audio "OUT" from your player and connected to "IN" respectively on your TV.
That's how it gos. Its a input and output law. The Player will be sending out the pictures and sounds (OUT) and the TV will be receiving from the other end (IN).
Its as simple is that. But if there is still no picture, then cross check your video wire (yellow), maybe its bad.
Good luck.
REGZA 42HL167 Won't turn on
I found it!!
In my case, the 42HL167, the CPU pcb (most commonly referred to the SEINE PCB) is having issues booting and just isn't starting up.
My friend gave me his 42HL167 after this problem started after a power event during a storm and I managed to fix it by reloading the firmware.
I posted instructions on my website at:
http://www.benjammin.net/www/pages/techtips/Toshiba-Regza-42HL167.html
Once I figured out some of the facts, it was a breeze...
I agree -- it seems like a design flaw. What cracks me up is that the places I called for a replacement SEINE PCB require the core (the bad PCB). Well GEE, why is that!?!? EASY FIX MAYBE?
It was. Too easy. Shamefully easy.
-Ben
SD-V391 DVD drawer won't open
I just had the same issue with this old, hardly used the SD-V391 DVD/CD drawer not opening. Took off the cover (5 screws, 3 back, one on each side), plugged in, heard the DVD motor whirling but no activity. Manually opened the mech tray by the white slide release (right side, under the mech), and saw the motor gear was not on the motor post. Found the gear, replaced it on the motor post, and works. Hope this helps folks, saved 20-30 bucks for a player at a thrifty, time to do this fixya was about 10 mins.
Not finding what you are looking for?