Toshiba Computers & Internet - Page 8 - Recent Questions, Troubleshooting & Support

Hi,

Ok - few things to clarify first:

When you say "it connects" what do you mean? Do you open internet explorer and can browse the net without problem?

You Pick up Wifi connections - make sure you pick the correct one to connect to and ensure that you use the correct Password.

If all the above are working then make sure the Laptop is rebooted when you attempt to connect to wifi. Msn has problems when it can not resolve correct IP address - rebooting the machine should fix that.

Or the connection speed is too slow - which these days can still happen.

Finally, Get the full error message from msn and type it into google. Guide yourself to the Microsoft pages with the correct solution.

So few things to clarify and few things to test out.

I hope this helps, don't forget to rate my solution.

Thanks.

https://www.laptoppartsexpert.com/i-17821868-toshiba-satellite-m45-s2692-psm42u-75w-ac-adapter-replacement.html

Your USB hub cannot provide enough power for your external hdd, you can try to plug it in directly to any free USB port for the mean time to check if its detected or not, if it has a power button ( which is not normal for regular USB powered EXT HDD) make sure that it is on, if its still not working try to use a different cable, a known good cable or plug it in to a different computer to check if its your USB port, or the usb cable or the ext hdd that is causing the issue

Hope this help.

i have a Toshiba satellite M105-S322 and all i had to do is open the ram compartment and pull up the plastic sticker or whatever you want to call it between the motherboard and the ram. There is a jumper called "CMOS_CLR1" use a screwdriver to short out the pins and it clears the CMOS.

Many sites seem to think this is it? https://drive.google.com/file/d/0B6IqcVTk0jpYY2VKSzRQOWRoTk0/view https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk02g_zHtTou52LFBcqMHGPCncJlHyA%3A1606502890799&ei=6knBX7qjMLKl5NoP08CJyA0&q=toshiba+satellite+P855-S5200+motherboard+schematic ..

see link it may help.thanks https://support.dynabook.com/support/viewContentDetail?contentId=108503#:~:text=If%20you%20forget%20the%20BIOS,Service%20Provider%20can%20remove%20it.&text=1.,until%20the%20message%20%22Check%20system.

U need cd key.check my previous solution

check your hard drive. is it connected or not. mostly it is observed that boot able device is not connected with computer or laptop. please check it.

How to Change the Boot Order for Toshiba Satellite Techwalla com

Point your mouse cursor on it, drag ( hold left click) move it to the top of the screen.
or you can try click setting >> auto hide checkbox

akee.4shared.com

If your laptop has TPM you won't be able to do a reset without a service center. It's part of keeping laptops secure.

Response code

you will need to reinstall the audio device driver.  go to toshiba.com and download the device driver for your machine.

HI,

Follow this steps:

1. Restart your computer.
2. When the machine first starts again it will generally list some equipment that is installed in your machine, amount of memory, hard drives installed etc. At this point you should gently tap the F8 key repeatedly until you are presented with a Windows XP Advanced Options menu.
3. Select the option for Safe Mode using the arrow keys.
4. Then press enter on your keyboard to boot into Safe Mode.
5. Do whatever tasks you require and when you are done reboot to boot back into normal mode.

I Hope it helped.

We have this page, now.shows lots of ways to reset BIOS PW.for Dells, no jumpersee this.https://pcdied.com/BIOS/e6540/dell-PW.htmlthat is the free why to get backdoor PW.yours and many others are in the TUBE, https://www.youtube.com/watch?v=SxGviSv7EoAToshiba PCs devision, are now gone from toshiba and sold.do not buy them unless $20 cheap.

Error Code 0xc0000185 regularly appears beside the report: The boot form data for your PC is missing or contains errors. Unhappily, if you unplug the USB devices from your Windows machine and reboot your operating system you will still keep getting this error code. Solutions of Error Code 0xc0000185:- 1: Reboot Your PC. 2: Repair the BCD with an Installation Media Disk. 3: Setup the Hard Drive. 4: Run CHKDSK. 5: System Restore. FULL Blog with Expert advice- Error Code 0xc0000185 Here is a way to fix any errors in Printer & Computer. Just follow the steps which are mention on the blog to fix the Error Code 0xc0000185 or Call us the number is given in Blog.

error is a common system error which tells you that rtl120.bpl file is missing or corrupted when you try to open certain files, applications or just start up the computer. Usually rtl120.bplerror happens when there is a conflict in the path of the Dynamic Link Library or when there is some missing/ corrupted entries in Windows registry. rtl120.bpl error may cause the related programs stop functioning and accesses areas of your system memory incorrectly.Method 1. Fix rtl120.bpl error Manually by Going Tweaking The Registry Keys.

• a. Click "Start" menu--"Run"--type in "regedit".
• b. Delete these registry keys as below manually: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionRun

Method 2. Fix rtl120.bpl error by Disabling Related Programs from Startup. The DLL file would be infected by virus or Trojan. If the anti-virus program on your computer detects and deletes the infected file, you would probably receive error message alarming you that the DLL file cannot be found. You absolutely will fail to run the relevant application or program but keep receiving DLL error message on the startup. In such situation, you have to re-download and install the application to re-register the DLL information. Accordingly you have to disable an application run automatically on system startup in order to avoid such DLL error message:

• a. Click "Start" menu--"Run"--type in "msconfig"---Start--- select the certain item to disable.
• b. Reboot your computer.

you can try a couple of things, on the back of the router is a small reset button, you will need a pen or pencil to push this button, hold it in for 10 sec. or so, until the router resets, and try to connect then, or unplug router, leave off for 10-15 sec. plug back in and wait fir it to reset this way, or a more involved way is to go to your DOS or command prompt window, type in this as follows

ipconfig /release

(wait a few seconds for this to do its thing)

ipconfig /renew
(if this doesnt work ask your parents if they put a block on the router)

Clear it with the 'clear cmos jumper'.