Toastmaster Juicers - Page 7 - Recent Questions, Troubleshooting & Support
Vitamx blender works at low
Did you ever find a way to fix your blender? I have the same problem, I'm sure it's a loose wire but can't figure out how to get to the wires.
4/9/2015 2:27:08 PM •
Juicers
•
Answered
on Apr 09, 2015
In the middle of juiceing, the machine abruptly stopped.
Some juicers have an automatic shut off in them that prevent the motor form burning out.
When mine shuts off, it invariably means it got backed up and some produce in on the blade or in the shoot..clearing that out and then turning on with mine --the juiceman turns it back on.
On my vitasmix and garbage disposal it has this motor saving feature but there is a little button ypou must hit to rest it. sometimes it comes right back on when the button is hit but sometimes waits as the motor is not sufficiently cooled down and will come back on when a short time passes.
Maybe juicing less stuff at each push will help. Mine tends to do this when I am juicing very rapidly and jamming stuff in or when something extra hard is in there and the motor overheats trying to cut it perhaps smaller pieces might help if the produce is hard or very fibrous.
3/16/2015 12:20:31 AM •
Juicers
•
Answered
on Mar 16, 2015
I lost the part you push the fruit and veggies down with. where can I get a replacement
Denise
Look for the model number of your juicer and the make (like ge juiceman etc) and type that and the word parts into goggle Maybe you can find the manufacturers and ask if they sell parts. if you cannot find the model number. try looking at juicers art amzon or ebay to see if you see your juicer..try that model number and look at the pusher to see i you think it will fit but having the real model number is better as you may think you have the right juicer and it is not the same.
I recently bought that part for my juicer on amazon and cost me $20. a week later I found the exact same juicer including the part I just bought for $20 so I bought in for both parts and if I want to use it upstairs as well as downstairs as juicing a lot for aggressive cancer.
So you might see it at a thrift store. would not be the right sixe or as good but maybe you can find a food processor at a thrift store and use that pusher. the often have juicer for sale at thrit stores ranging from $6 to about $20..test it by plugging it in and seeing if it works or any smoke comes out. This might be cheaper than finding as replacement plunger.
3/16/2015 12:13:35 AM •
Juicers
•
Answered
on Mar 16, 2015
Pusher stuck in fusion juicer
May not be repairable if pusher is distorted or damaged. If jammed with a foreign body, need to carefully pry apart and clean out. Find a handy person and offer a fine juice meal.
11/25/2014 5:51:48 PM •
Juicers
•
Answered
on Nov 25, 2014
Hi, how do I get started with a bifinett juicer kh 450 please, a friend gave me one. Thanx
Safety advice
1. Before using your citrus press for the first time, please read thro
and this safety advice carefully.
2. The citrus press is to be connected only to an earthed mains soc
installed in accordance with the applicable regulations.
To avoid accidents, never operate several household appliances f
at the same time.
3. This citrus press is intended only for domestic use.
4. Do not use this citrus press outside.
5. Do not leave the citrus press to operate unattended or allow chi
6. Handle the moving parts of the device with extreme care and ca
7. Do not remove the mains plug by pulling on the mains cable. Gra
8. Do not allow the mains cable to hang down.
9. Do not immerse the device in water or hold it under running wat
to the section "Cleaning".
10.Keep this safety advice for later reference and if necessary pass
11.Should the mains cable become damaged, it must be replaced b
centre or electrical equipment repair centre. To prevent dangerou
all repairs of electrical equipment must be carried out by suitably
Specification
Lid
Press cone
Juice filter/sieve
Sieve holder / juice container
Spout
Housing with cord storage (on underside)
ne"> Before first use
• Before using your citrus press for the first time check that the local mains electricity supply
corresponds with that indicated on the citrus press.
• Before using the citrus press for the first time clean the press cone, juice filter, juice container
and spout. Please refer to the section "Cleaning".
1. Insert the plug into the mains socket.
2. Wind up any excess cable on to the underside of the citrus press and fix the cable in the
recess at the back of the underside of the base.
3. Place the device down on a flat sturdy surface. Always keep the citrus press out of reach
of children.
Using the citrus press
Note: Before juicing we recommend that you roll the fruit on the work surface whilst pressing
down gently. In this way you will obtain-more juice. We also recommend that you clean the
citrus press immediately after use. Please refer to the section on "Cleaning".
1. Open the lid.
2. Place the sieve holder / juice container in the device.
4
3. Select the appropriate juice press. The small press piece is intended for fruit with little flesh.
The larger press is placed on the smaller so that juice and flesh can be obtained (ideal for
pressing larger fruit such as grapefruit etc.).
4. Place the sieve with the small press (or both presses) on to the motor spindle. The citrus
press tongue and the juice collector handle must be in line with one another.
5. Insert the plug into the mains socket.
6. Place a glass under the spout.
7. To open the spout press it downwards.
8. Press a fruit half on to the press - the device starts automatically and stops when the fruit
is removed. The alternating left-right movement of the press obtains the best yield of juice.
9. Push up the spout before you remove the glass from beneath it. This ensures that the spout
does not continue to drip.
10.When the citrus press is not needed any longer, pull out the plug and remove any fruit residue
from the sieve.
Cleaning
1. Before cleaning always remove the plug from the mains socket.
2. Remove the press cone, juice filter and juice container from the device.
3. Press the spout fully downwards and clean it thoroughly.
Note: The spout cannot be removed from the device.
4. Clean the press cone, juice filter and juice container under running water.
Note: These parts can be washed in a dishwasher. Place the parts in the upper basket
of the dishwasher.
5. Clean the citrus press housing with a moist cloth only. To remove stubborn dirt put a little
detergent on the cloth. Never use harsh cleaning or scouring agents.
Never immerse the motor housing in water or wash it under running water.
11/18/2014 5:47:56 PM •
Juicers
•
Answered
on Nov 18, 2014
How i can cleans it
Put three drops of dish soap in it and add water .... put it on the juicer and run for 30 seconds. Empty soapy water add plain water do it again, and just for good luck.... do it one more time to get rid of all the soap.
10/20/2014 9:46:14 PM •
Juicers
•
Answered
on Oct 20, 2014
Manual for Emson Juice Extractor, Model GH-2011
I bought one without a manual today for 2 dollars at a yard sale , blades lock in about a half inch - turn counter clockwise to remove, may need to press down or press button in back. base below comes off too for cleaning - turn clockwise. They may come off hard the first time. the button in the back may help releasing both. Make sure to unplug first. I don't have a manual either, just some mechanical sense.
10/18/2014 10:19:23 PM •
Juicers
•
Answered
on Oct 18, 2014
Not finding what you are looking for?