Tilia Kitchen Appliances - Others - Recent Questions, Troubleshooting & Support

Question edited for clarity. That number appears to be a Serial Number which doesn't aid finding manuals. However, the manual is here

Tilia foodsaver Manuals

ManualsLib https://www.manualslib.com > ... > Kitchen Appliances We have 1 Tilia foodsaver manual available for free PDF download: Instruction Manual. Tilia foodsaver Instruction Manual (28 pages). ..

I had the same problem and got this information from Foodsaver:

Turn Foodsaver unbit on and press the cabncel button. That should release the unit for cleaning.

It worked for me!

Question edited for clarity and spelling. Question moved from Cars and Trucks Category. your search query for this is make model replacement parts https://www.google.com/search?q=food+saver+vacuum+sealer+replacement+parts ..

Sealing always tends to be the problem with FoodSaver because during the course of normal wear and tear, the sealing strip and wire will naturally need to be replaced.You can get replacement heating wires and strips at www.elementandteflon.comWe started out selling just replacement parts for heat impulse sealers but we kept on getting customer requests for FoodSaver parts so we've added that section to our website.

I have foodsaver V 825 and I need to replace the gaskets (upper and lower parts) How can I found them ??

The reset button is the small black rubber covered hole on the left side of the vacuum channel. If you press down on that with something like a knitting needle with the unit on, it should reset

I experienced the very same problem. Pulled out the two foam seals, rinsed them under a cold water tap, wiped off with a tea towel, reinserted,

Heating Element / Wire - After heavy use of the vacuum sealer, it is natural for the heating element to break. The amount of seals per sealing wire is dependent on your timer setting, how often you use your vacuum sealer and how thick your vacuum bags are. When you replace the heating element, we usually recommend you replace the sealing strip as well. Different machines have different sizes of heating elements but we carry five stock elements. This website sells some parts http://www.elementsandmore.com/foodsaverparts

Tilia FreshSaver Plus VacLoc Sealer and Designer Canister eBay Is this the same model? Seems like a good price if all the parts and cable are there.

http://www.foodsaver.com/ For technical support.
You should be able to just push it back in. You have to take it out to hook to the vacuum port don't you? Here is another link for manuals on this.
http://kitchen.manualsonline.com/ex/product/headline/m/foodsaver/d/food_sealer/p/FoodSaver%2BUltra

Foodsaver has a toll free number that you might call to see if they can provide the part. 877-777-8042 is what is listed.

This is likely happening because the unit cannot detect that a vacuum has formed, and as a result, the unit never "turns on" the heating element to seal the bag, with the gaskets around the vacuum channel being the probable culprit. The Foodsaver gaskets will deform and/or dry out with time, just like in any device, but you don't necessarily have to replace them. I've tried this inexpensive solution on my own Foodsaver V2490, and it works perfectly.
Buy some food-grade silicone grease and apply it to both the upper and lower gaskets. I remove the gaskets and coat both sides with a thin layer of grease before replacing them in their respective channels. And since this grease will be absorbed and/or dry out with time, you will have to do this occasionally, so I also flip the gaskets (i.e. turn them over) whenever I apply the grease.
You can buy a 2 oz container of silicone grease at any dive store, or you can buy it over the Internet by searching for "Trident silicone grease".
This is a link where you can buy it for around $7.00:
Dolphin Dive Center
I do not work at this dive center, but I am a scuba diver and already had some grease that I use for the numerous rubber gaskets in my gear. The 2 oz. jar will last you several years, and you will find many other uses for it around the house since the grease will last longer than a spray.

You might check with RepairClinic.com. They may have the switch or know where to locate it.

Does the vacuum seem to run forever and it doesn't seal?
Clean the black foam seals

Replace them if needed. they can be purchased from Tilia
WWW.FOODSAVER.COM

You need new replacement gasket, to get one, visit amazon FoodSaver Vacuum Sealer Upper Gasket Assembly T910 00075. I hope this was helpful. cheers