Medical - Recent Questions, Troubleshooting & Support

Question edited for clarity and typo. Question moved from Cars and Trucks category. Too specialised for Fixya. This is professional medical equipment. Contact maker support or send to them for repair. No one reports a fix for that error message. https://www.google.com/search?q=cardiocare+2000+data+error+please+turn+off

CardioCare 2000 - Interpretive 12 Channel ...

Bionet America https://bionetus.com > Medical > ECGs/Spirometers The CardioCare 2000 is an economically priced interpretive 12 channel electrocardiogram (ECG/EKG) machine that does not compromise on performance.

CardioCare 2000 - Interpretive 12 Channel ...

Bionet America https://shop.bionetus.com > products > cardiocare-2000... CardioCare 2000 is an economically priced interpretive 12 channel electrocardiogram (ECG / EKG) machine that does not compromise on performance. US$995.00 ..

Navigate to the ECG settings using the control panel or keyboard. Look for the option related to print settings or number of sheets. Select "1 sheet" or the equivalent option. Start the ECG recording for the patient. The machine will now print only one sheet of the ECG recording. Remember to consult the AT-102 Service Handbook for detailed instructions specific to your machine. AT-102 G2 (IN) ° (schillerus.com) Thermal Recording Chart Paper for Schiller CARDIOVIT AT-102 Recorder (schillerservice.com) 0110_EN_AT102_LQ.pdf (schillerservice.com)

Normal cataract surgery uses a phacoemulsification unit. This unit unit has a small tip on the end of it which uses a jackhammer type motion, it is irrigating as well as aspirating the eye to remove the debris from the eye (loosened catatact) while not collapsing the eye.

The laser technique is an alternative way to break up the cataract yet it still will need irrigation and aspiration for removal.

get a new machine, try out rotary machines. Stigmas and Dragonflys are great, pricey but legit.

Question edited for a lot more clarity. Question moved from Heating and Cooling category The manual explains this very clearly. Here it is in case you lost it. The cuff wasn't fitted correctly. https://www.manualslib.com/manual/1242713/Hartmann-Tensoval-Comfort.html?page=141#manual ..

If your Bionet CardioCare 2000 ECG machine is indicating that the paper is empty even though the paper roll is correctly loaded, there could be a few reasons for this issue:

1. Paper Jam: Even though you've loaded the paper roll, there might be a paper jam inside the machine that is preventing the paper from feeding properly. Check if there's any paper stuck or misaligned within the paper path.
2. Paper Not Loaded Correctly: Ensure that the paper roll is properly loaded and inserted into the machine according to the manufacturer's instructions. Sometimes, improper loading can cause the machine to not detect the paper correctly.
3. Paper Sensor Issue: The machine has sensors that detect the presence of paper. There might be a malfunction with the paper sensor, causing it to inaccurately detect the absence of paper. Dust or debris could be affecting the sensor's operation.
4. Paper Roll Compatibility: Ensure that you're using the correct type and size of paper roll that is compatible with the Bionet CardioCare 2000. Using the wrong paper could lead to detection issues.
5. Sensor Calibration: There might be a need to recalibrate or reset the paper sensor if it's misaligned or malfunctioning. This would likely require referring to the user manual or contacting the manufacturer's support for guidance.
6. Machine Error: There could be an error or malfunction within the machine's internal components that is causing it to incorrectly display the "paper empty" message.

In any case, I recommend the following steps to troubleshoot and resolve the issue:

1. Carefully review the user manual to ensure that you've loaded the paper correctly and followed all the steps accurately.
2. Check for any visible paper jams or misalignments within the paper path.
3. If possible, power cycle the machine by turning it off, waiting for a minute, and then turning it back on. Sometimes, a simple reboot can resolve minor issues.
4. Clean the paper sensor area and the paper path to ensure there's no dust or debris affecting the sensor's operation.
5. If none of the above steps work, consider contacting Bionet's customer support or a qualified service technician for further assistance. They should be able to guide you through troubleshooting or provide professional help to resolve the issue.

Please note that specific instructions could vary based on the model and its specific design, so referring to the user manual and manufacturer's support is essential for accurate troubleshooting.

Question edited for clarity. Question moved from Building Materials to model category. There is no data on this. I found this though, and it sounds like removing the batteries, or the motherboard battery would probably reset it. Keypad Unlocking allows a cart to be opened with a valid entry code instead of a metal key. The re-programmable keypad has error and battery indicator lights and is powered by long-lasting disposable batteries. Keypad Control Panel with Best Lock https://manualzz.com/doc/24136418/lionville-medication-carts-brochure https://www.google.com/search?q=Metro+Lionville+ipoint+1+workstation+reset+code No manual and no maker website (worrying) https://www.google.com/search?q=metro+lionville+ipoint+1+workstation+manual+pdf ..

This is a specialist medical ECG machine. Contact the maker direct. We just have a Contec section for easy filing of questions.

ECG1200G Digital 12 channel/lead EKG+PC Sync ...

https://contechealth.com > ecg1200g-electrocardiogram ECG1200G is an electrocardiograph which can collect 12-lead ECG signal simultaneously and print ECG waveform with thermal printing system. ..

Question edited for clarity. Question moved from Car Audio! It is nearly always abuse to the remote from bending the wire where is enters. to body, or the end where it enters the bed base. Craftmatic will repair it free of charge. http://crm.craftmatic.com/service/ ..

Question edited for clarity. Question moved from Power Computers category. Amazon it seems https://www.google.com/search?q=okimat+2sl+5+pin+power+lead+replacement ..

Contact Philips tomorrow morning https://www.google.com/search?q=BiliChek%2C+a+noninvasive%2C+transcutaneous+bilirubin+measurement+system.+Service+Code%3A101d ..

some help here, but not really enough on Page 1. https://www.google.com/search?q=spirosift+sp-5000+manual ..

If your GE Mac 1200 ECG machine is not printing the interpretation, even though the interpretation option is marked as "Y," there may be a problem with the printer, the cables, or the settings. To troubleshoot this issue, you can try the following steps:

1. Check the printer to ensure it is turned on and properly connected to the ECG machine. Make sure the cables are securely plugged in and not damaged.
2. Check the printer settings to ensure the interpretation option is enabled. You can do this by pressing the "Setup" button on the ECG machine and navigating to the "Printer" menu.
3. If the printer settings are correct, try resetting the ECG machine by turning it off and then back on again. This may clear any temporary glitches or errors that are preventing the interpretation from printing.
4. If the problem persists, you may need to contact GE customer support for assistance. They will be able to provide you with more detailed troubleshooting steps and help you resolve the issue.

Page 39 of the manual refers. Wait for good data. When enabled (ON), the system delays the ECG reports until the system has collected ten seconds of low noise waveform data (all electrodes must be connected). To force an immediate report, press [ECG] again when the system displays Waiting for Good Data. The report includes "Warning: Data quality may affect interpretation." When disabled (OFF), the ECG report starts after 10 seconds of ECG waveform data, regardless of quality. No warning message is included. NOTE: The ECG report does not include waveform data for disconnected electrodes. Leads with disconnected electrodes are not used in the ECG analysis. http://www.cardiacdirect.com/brochures/man_3446.pdf and also https://www.google.com/search?q=Atria+3000+ecg%2C+Analysis+error%2C+data+quality+may+affect+interpretation ..

Ask your Doctor. At least ask a pharmacist.

Contact the maker direct.

CMS8000 CONTEC ICU CCU Vital Signs Patient Monitor ...

https://contechealth.com > products > cms8000-patient-... It can synchronously display eight-channel waveform and full monitoring parameters equipped with an optional 48mm thermal recorder. The monitor can be connected ... ..

$79 here! https://www.davismedical.com/Products/GE-Marquette-Mac-6-Resting-ECG-Operators-Manual__GMR-EKG-M407465-001.aspx Mac 15 is free http://www.frankshospitalworkshop.com/equipment/documents/ecg/user_manuals/Marquette%20MAC%2015%20ECG%20-%20User%20manual.pdf There is a forum where 2 people have it and will send, but the post is 8 years old https://www.medwrench.com/thread/98272/mac-6-ekg-oper-manual https://www.google.com/search?q=user+manual+for+Marquette+Mac+6+EKG+machine .

you can buy a coil replacement kit from almost any distributor or supplier personally i would do that when you cleaned the gun did you take it apart ?

notify the manufacturer for their specs