Sunforce Electronics - Others - Recent Questions, Troubleshooting & Support


The batteries are connected directly to the starting circuit of the inverter. If u don’t want it consume any power from the battery I would recommend an isolater switch between the battery and inverter.

Sunforce... | Answered on Sep 30, 2019


The inverter may not be suitable for use with an inductive load such as a vacuum cleaner.

Sunforce 2500... | Answered on May 29, 2018


Have you tried removing the batteries for a minute and unplugging the main unit for the same amount of time together. The idea is to fully clear any settings that might have gotten hung up.

Sunforce 1000W... | Answered on Oct 28, 2017


Hi Trevor,
A 1000W can barely supply 5A at 220V, less than 10A at 110V. So if a 40A fuse blows, there is a serious problem and you should not attempt to use this unit after it has been checked by a qualified person. Please be careful!

Good luck!

Sunforce 1000... | Answered on Nov 14, 2014


Did you check The fuse can be found in the 12V DC barrel connecter

Sunforce 11134... | Answered on Aug 03, 2014


Likely the thermistor used as a thermal sensor shorted out. Either internally, or to the heat siink.

Sunforce 4500W... | Answered on Jan 16, 2012


Mixing different AH rated batteries, different ages of even the same type battery is a bad idea. The new batteries will be effectively reduced to the equivalent of your worst battery.

Sunforce 11260... | Answered on Nov 06, 2010


If you meant for the mains supply then it must be connected in series to the load so that in absence of power the invertor takes over and when there is power the supply takes over as it charges the battery.
So have this wiring done with the connection routed from the fuse box or main board.

Sunforce 1000... | Answered on Sep 30, 2010


Hi , i'm sorry but i dont really understand your question , assuming the current draw is around 45 amps then 2 /0 GA is fine , just keep your leads from your panel nice and short , the connection kits are sold by sunforce and there plenty of suitable connectors on the market
example link below
http://www.globalepower.com/Datasheets/BatteryConnectors/BatteryGlobal.pdf

Sunforce 11264... | Answered on Aug 17, 2010


Went to a free website with industry professionals sharing their knowledge instead of signing up for more ways to spend what little money I have.

Sunforce 11260... | Answered on Nov 01, 2009


Numbe one reason ...you can not afford it.

Sunforce 11260... | Answered on Jul 23, 2009


format it useing nokia 6120c,6220,and c5-00 phone.. or view this site= http://www.makeuseof.com/tag/format-write-protected-usb-flash-drive/

Electronics -... | Answered 11 hours ago

Not finding what you are looking for?
Sunforce Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Top Sunforce Electronics - Others Experts

Robert Hunt

Level 2 Expert

208 Answers

Tom Chichester

Level 3 Expert

54386 Answers

Lukas Alexander

Level 1 Expert

21 Answers

Are you a Sunforce Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...