Stickers Cycling - Recent Questions, Troubleshooting & Support

The online stores have a wide range of stickers for hydro flasks that are not just made of high-grade material but also offer protection against the sun and are waterproof in nature. These stickers made of vinyl stay and stick on any kind of item that you choose. Also, you can easily remove them, without them leaving behind a sticky feel. To have a look at an enormous collection of colorful and cute decorative stickers, visit https://www.amazon.com/dp/B07XJ7G1Q1

most auto stores sell a chemical decal remover --a hairdryer can soften glue and can peal off on th spongy can use plastic putty blade --piano wire --fishing line

You may not be able to get original decals. Google bicycle decals and do some research to see what's available. If you are considering painting your bike you should also thoroughly research that with a Google search for paint bicycle, as it's easy to do a poor DIY job that will neither look good nor last long. If it's a higher end bike it may be worth it to you to have it professionally powder coated. I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Gently in the garage

i tried to get them before and no luck, however i have a site that got them and stumpjumper decals for me, they are slow but the decals are first class bikedecals.com they are made in uruguay and have stood up to mud and powerhose so far

I would first check out there website. Another option is there are several sites that manufacture custom sticker kits for you but I don't have a specific site in mind.

Hi,

Here is the site for replacement stickers.

http://store.yeticycles.com/store/show_product/294

Hope this helps!

Please rate me:)

Gary

We don't supply parts. Advice. Take the wheel to a bicycle shop for an assessment as the parts are not universal among the different hub makers.

Go to a bike shop for it.

Contact the distributor for United in your country, and they should be able to send you a set.

The lube you want is bicycle chain oil. Nothing else is acceptable. Any brand is fine, only make sure you use a bicycle-specific chain oil. Only lubricate the chain, never the derailleurs. And it is best to scrub your chain prior to lubing by using a good chain brush and a degreaser.
The seat is lowered by either a quick-release collar or a standard screw-type collar. The former reuires no tools, but the latter will require an allen wrench. If you need to use a tool to do it, bicycles are 99.9% metric. When adjusting, you want to be comfortable, but you also want to maximize pedaling power by adjusting the seat to a height that puts you where the end of your down-stroke ends where your leg is only slightly bent.

i hope this helps
-matthew

Is it the axle in the hub or a skewer (quick release) that is broken? If it is the skewer, those can be replaced. If it is the hub (with a through-axle), then you would do best to buy a new wheel.

The Next PX 6.0 uses a 27.2mm seat post.

There is no serial number database for those bikes https://www.google.com/search?q=white+super+chief+bicycle+date+of+manufacture https://www.google.com/search?q=white%27s+super+chief ..