Sharp Aquos - Recent Questions, Troubleshooting & Support


You may change the video resolution and the video format with the help of the iDelashare VideoGo

Sharp Aquos... | Answered Yesterday


Could be an open internal fuse or power supply failure

Sharp LC... | Answered 3 days ago


AVI is just a format - the video inside it can be coded using just about every codec. That sharp supports files that are coded using DIVX 4 to 6 and XVID 0.8 to 1.3. You must make sure that the avi files were coded correctly. For that install this program and use it to check the files
http://mediainfo.sourceforge.net/en

Sharp Aquos... | Answered on Oct 31, 2019


On my Aquos it's saying no carrier and database empty what do I do, I have trying to reset TV but free view isn't coming on and it's saying carrier 0.

can anyone help

Sharp Aquos... | Answered on Oct 27, 2019


We have the same TV. In settings for sound you need to select the port directing where you want sound to play. It may be that it is currently setup to play to a sound bar.

Sharp Aquos... | Answered on Oct 06, 2019


How many times per second does the POWER led blink? (dont worry about the OPC).

1x per second (constant, steady blink) = bad inverter/lamps
2x per second = bad power supply
3x per second = bad main board

You can buy the parts online and fix if yourself!!

Sharp Aquos... | Answered on Jul 09, 2019


CHANGE IC202 WITH TL431 OR TRY PUSH INPUT AND VOLUME DOWN THEN PLUG THE POWER UNTIL THE GREEN LIGHT START ,,, WHEN IT START PUSH VOL DOWN AND CHANNEL DOWN AT THE SAME TIME AND PLAY WITH THE SETTING

Sharp Aquos... | Answered on Jun 20, 2019


They are metric screws, you van get them at Lowe or HD, try M5 or M6. they are about 35cent each so you can try difference length.

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

Sharp Aquos... | Answered on Jun 19, 2019


OK guys I'll save you. The tv is in hotel mode. To get it out from there you have to go in service menu but DO NOT CHANGE ANY OTHER THING IN THERE, only what i tell you. With the tv on and the K letter on the screen press in the same time vol- and ch- on the tv set. Now you'll be in service mode. On the remote press down arrow (not -channel) and you'll see up industry init. go there with ch- and press vol+ and enter. let the tv like that for few seconds and the tv will go green and hopefully industry init succsesfull will be on the screen. After that unplug the tv and replug it. Done!

Sharp Aquos... | Answered on Jun 02, 2019


Try unplugging the unit and hold the volume up and channel down buttons down and plug the unit in. Let go of the buttons and the unit should come on up the service mode. There will be a small k on the screen. With the remote press the channel up button . This should bring up a menu that will show a lamp error line. If the lamp error is = to 5 the unit is in lamp error shut down. Use channel down to highlight that line and the curser right arrow to highlight the lamp error #. Hit the enter button to clear the lamp errors. Now unplug the unit and let it sit for a minute and plug back in. If the unit does not come on by doing this or if it does and you do not find lamp errors the power supply pcb may have been damaged .

Sharp AQUOS... | Answered on Mar 30, 2019


The replacement power board may have failed, possibly due to some other failure condition.

Sharp Aquos... | Answered on Mar 07, 2019

Not finding what you are looking for?

-1,869 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Televison & Video

  • Forum

View Most Popular

  • Sharp Televison & Video
Loading...