Sharp DVD player not working?
the reason as to why your sharp dvd player isn't working is because there may be a disk stuck inside, try pressing the STOP button, unplug it, press EJECT while plugging it
Sharp AR-7054 only showing a dotted triangle!
The dotted triangle and blinking LED on your Sharp AR-7054 TV are indicators of a video problem. There are a few possible causes for this, including:
A loose or damaged HDMI cable.
A problem with the TV's internal video circuitry.
A problem with the source device (e.g., Blu-ray player, streaming box).
To troubleshoot the issue, you can try the following steps:
Check the HDMI cable connections between the TV and the source device. Make sure that the cables are properly inserted and that there are no visible signs of damage.
Try using a different HDMI cable.
If you are using a streaming device, try connecting it to a different HDMI port on the TV.
If you are still having problems, contact Sharp customer support for further assistance.
Here are some additional tips that may help you fix the dotted triangle problem on your Sharp AR-7054 TV:
Try resetting the TV to factory settings. This can be done by pressing the Menu button on the TV remote control and selecting Settings > System > Reset.
If you have recently updated the TV's firmware, try rolling back to the previous version. This can be done by downloading the previous firmware from Sharp's website and following the instructions in the firmware update file.
If the problem persists, the TV may need to be repaired. Contact Sharp customer support for assistance.
How do I change bulb in sharp fridge freezer
hello
first unplug the fridge freezer from the power outlet.
Look for the bulb compartment or socket where the light bulb is located
then remove the bulb and then install a new one .Ensure replacement bulb is of the correct type and wattage
then test the bulb
8/25/2023 7:18:50 AM •
Sharp...
•
Answered
on Aug 25, 2023
Need to copy/transfer 8mm camcorder tapes or fix broken Camcorder
There is no adapter available because the tape size is different than VHS. If yuo can post a picture of the part that is broken, I may be able to locate one. I have a number of scrap units that I can part out. Please also indicate where you aer located in the country.
Thanks,
Dan
Sharp 60LE600U stand by light is on, backlights come on and go right back out along with the standby light?
From the past history of Hisense brands of TV's the power board very seldom gives issues, they build them quite well, the only way to troubleshoot this issue is with a multimeter, look for the power on pin on the power supply connector going to the main board, you need to see about 3.5 vdc there when you turn the set on, I think you will see the voltage there for a few seconds then drop to almost 0, if you find this it's the eeprom that's lost it's data, this IC is located on the main board, there are 2 fixes, one is to replace the IC the other is replace the board. The chip costs under $20 but it's somewhat difficult to replace. Here is the listing for the IC https://www.shopjimmy.com/sharp-dkeymf905fm04-kf905-qpwbxf905wjzz-main-board-loc-ic8401-eeprom-only/
Not finding what you are looking for?