SanDisk Cruzer - Recent Questions, Troubleshooting & Support - Page 3

mon usb ne fonction pas es pc ne pas formater

okay, problem isn't in ur pendrive problem in ur computer, some kind of viruses attack only removable drives, and user didn't find viruses in computer and also antivirus, you should download microsoft security essential here,--- http://windows.microsoft.com/en-IN/windows/security-essentials-download , and update this software insert ur pendrive and start virus scanning as a whole computer including ur pendrive ur problem will surely solve

What software are you using to attempt formatting? You should be using the special software available from the card maker.

Need more details: What computer and what operating system? What is the capacity of the memory card and the USB Flash Drive? Are you using the computer's built in card reader or an external one? If the computer is older, or you are using an older operating system, it may not recognize higher capacity cards, and you may need to buy a higher capacity card reader.

WHAT PROBLEM ARE U FACING? KINDLY EXPLAIN IT CLEARLY! http://www.tinyurl.com/9307740

This could be a Windows Registry setting that disables you from writing to your flash drive (or formatting it). If you are running Windows after Win XP SP2, you can change that setting. To disable the write protection:

1.From the Start menu, click "Run", type "regedit", and press <Enter> or click <OK>. 2.Navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > StorageDevicePolicies. 3.Double click on "WriteProtect" and change the value to 0 (WriteProtect = 0 for disabled; 1 for enabled). 4.Close the registry editor and restart Windows. 5.After Windows starts, test writing to your USB drive. Important Note: Serious problems might occur if you modify the Windows registry incorrectly. **PLEASE** make sure that you follow these steps *exactly* and *carefully*. For added protection, back up the registry before you modify it in case you have trouble so it can be restored. For more information about how to back up and restore the registry, follow the steps as in the KB Article: http://support.microsoft.com/kb/322756/

No idea what you're describing.

It's damaged. Get a new one.

If there is any Media Error not possible to format the drive otherwise use the following method on Windows 7 Open a Administrator command Prompt and type the command one by one 1.list disk you can find the avilable disk and note your USB Drive Disk Number 2.select disk 1 (change the number) 3.clean 4.create partition primary 5.format fs=ntfs quick 6.assign if no problem in usb it will format your USB Drive

Some DVD players are more capable than others of reading "other" types of media. Upgrade to a newer DVD-player.

Copy all the files onto your computer. Then reformat the card, to identify and bypass the "bad" spots of memory. Note that flash-drives have a limited life-time -- after too much usage, you will be able to "read", but not "write" to the device. This is a sign that the device is "dying", and should not be trusted with "valuable" data.

Try the flash drive in another computer, and if the problem is still there, the product may be corrupted.If the product is still in it's warranty period, you should go to the manufacturer's service center, and they will replace it free of cost. If the warranty period is over, just buy a new one.Hope this helps, Mrityunjay.

I m getting problem with IOCTL error with my sandisk 1gb pendrive..i m unable to format of open..will u plese send me solutions how to get rid of this error...??

hi nice soft

Easy put it in, drag files you want to it and eject. then insert to other comp and drag files you want out then eject.

turn the radio off then go into the menu and configure blue tooth and wifi to on. with radio and device on set device to discoverable. have radio scan for new devices and pair with code.

your memory card has bad sectors that needs fixing by typing chkdsk x: /f /r (where x is the memory card) at the command prompt on your pc/laptop

SOLUTION 1 - Unlock the memory card. There is a Lock switch on the left side of the SD card. Make sure the Lock switch is slid up (unlock position). You will not be able to modify or delete the contents on the memory card if it is locked. NOTE: If you are using a microSD/microSDHC card or a miniSD/miniSDHC card, insert the card into the microSD/miniSD adapter. The SD adapters will also have a lock switch. SOLUTION 2 - Toggle the lock switch. If the lock switch is loose and moves easily It is likely the switch is sliding to the locked position as the card is placed in your host device. In this case the card will need to be replaced. SOLUTION 3 - Try to Format the card using Disk Manager (For all memory cards) The data on the memory card may be corrupted. Format the card under Disk Management and then try to transfer files to the device once more.

Click Start, then type device manager in the Search box, then click Device Manager. Expand Universal Serial Bus controllers. Right click a device and click Uninstall. Repeat for each device. Once complete, restart your computer. Your USB controllers will automatically install.

To uninstall the application go to the Settings of your android phone. Select Applications>Manage Application. Locate and select SanDisk Memory Zone from the list of all the applications installed on your phone. Select Uninstall and the application will be removed from your phone.