Ryobi Garden - Page 8 - Recent Questions, Troubleshooting & Support


CHECK WITH RYOBI OR WITH HOME DEPOT AS THEY SELL THAT PRODUCT

Ryobi Garden | Answered on Dec 02, 2018


if you have not already got rid of this item you should have done. they are a waste of time to repair . by a different make.

Ryobi Garden | Answered on Nov 25, 2018


If you can't find one could I buy the carb? Or just the float gasket. That would be awesome. My email is Ben.kniss88@gmail.com

Ryobi Cultivator | Answered on Nov 09, 2018


Most likely the fuel mixture settings are off.

Ryobi Garden | Answered on Nov 08, 2018


Looks l8e it's a bayonet connection. Push the lance end towards the trigger and the make a 1/4 turn counter clockwise.

Ryobi Garden | Answered on Nov 05, 2018


There has to be two non-return valves in the system; one before the pump and one after. From your description I suspect the valve on the output side of the pump is absent which means operating the pump will not pump oil but will suck and blow air from oil outlet. Similarly the intake valve might be absent which means oil will be drawn from the reservoir and then pushed back, though in practice a little oil would probably emerge from the exit port. The description of valve tends to conjure images of rather more than the steel ball and possibly tiny spring that usually constitutes the valve, components that are easily displaced, lost, forgotten.

Ryobi Garden | Answered on Nov 04, 2018


Hi and welcome to FixYa,

Areas/components to check/clean and ensure no clogging:
  • oil filter
  • oil line
  • oiler pump
  • worm gear drive
  • bar
  • oil hose/feeder to the bar.
4f71046.jpg
For the exploded parts diagram of a PCN4040, pls click here.

Good luck and thank you for using FixYa.

Ryobi Factory... | Answered on Oct 25, 2018


hi Gerrie.
this is all i could find.see if this link helps you out.
Ryobi Generator RG 2700 MANUAL DOWNLOAD Google Search

Ryobi Garden | Answered on Oct 23, 2018


Be sure the spring is not bound up with grass or mud. It has to recoil to push the head down so the line doesn't continue to shoot out.

Ryobi Garden | Answered on Oct 22, 2018


I have a Ryobi Model RY28040 straight shaft line trimmer. In my case I replaced the complete String Head Assembly that includes the String Head Housing, Spring, and Spool and the string still did not advance. I then discovered that the bolt in the Spool Retainer cap (the red cap that attaches the spool to the shaft) was fused and not moving. The bolt needs to be loose inside the cap in order to allow the spool to move in and out by the spring. I loosened the bolt and fastened the spool back onto the shaft. Fired it up and bumped it a few times and the line began to advance. Turns out I probably only needed to replace the Spool Retainer rather than the String Head Assembly.

Ryobi 18 Volt... | Answered on Oct 21, 2018


Contact Ryobi directly and request the 524 HXX wiring diagram

Ryobi Garden | Answered on Oct 09, 2018

Not finding what you are looking for?
Ryobi Logo

4,348 questions posted

Ask a Question

Usually answered in minutes!

Top Ryobi Garden Experts

Nick Olsen

Level 2 Expert

196 Answers

Dennis Tokarzewski

Level 1 Expert

21 Answers

Wayne McNeil

Level 2 Expert

209 Answers

Are you a Ryobi Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...