Ryobi Masonry Tools - Recent Questions, Troubleshooting & Support

Hi, if you go on utube you will find a vidio on how to set the blades up, it is realy simpe, all the best.

Ryobi Thickness... | Answered on Jun 01, 2019

You need to remove the right side cover, indicut knob, crank, and cutterlock knob. Remove the top cap (4 screws) crank the motor asssembly to the top exposing two hidden screws in side wall, remove those and the two at the top and remove sidewall. . Tension adjustemnt screw is right near the motor pulley. Loosen it and push motor inward while sliding belt over pulleys. It is a little tough getting the belt in between the pulley and main carriage. If you attempt to put the belt on one pulley at a time, you are working a diagonal, which is longer that the inline dimension. Apply a drop of liquid dish detergent to each pulley for lubrication. Start the edge of the belt onto both pulleys; making sure the splines & grooves are aligned on both pulleys. Slowly work the belt on, 32nd of an inch at a time one pulley, then the other. Wash the soap off when you are done'

Ryobi Thickness... | Answered on Feb 03, 2019

I called sears and they actually HELPED

Ryobi Masonry... | Answered on Apr 30, 2018

check with ryobi or even home depot . they may be able to order you one

Ryobi Masonry... | Answered on Feb 12, 2016

Not finding what you are looking for?
Ryobi Logo

49 questions posted

Ask a Question

Usually answered in minutes!

Top Ryobi Masonry Tools Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

ray gallant

Level 3 Expert

66213 Answers

Paula Hamilton

Level 3 Expert

851 Answers

Are you a Ryobi Masonry Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides