Rotary Drills - Page 7 - Recent Questions, Troubleshooting & Support

You can use an AW46 Hydraulic oil. Do not put more than 35cc of oil in tool if you just poured out the old oil. You can put 50cc if you washed the housing out. Too much oil takes out the cushing of air between pistons. You will break the connecting rod or strip the gears. If you take the cap off of the top of the gear housing, older ones will be black. Newer ones had a red cap indicating that there was a clutch and see and it still looks wet with oil then I would not mess with it.

You can search it online or go to Electronics store.

https://www.fixya.com/support/t24996454-remove_chuck_super_hawg

Hi, depending on the age of your device, it might be time to switch the battery of the product if the current battery isn't strong enough to hold a charge. Thank you.

My problem is which wires connect to which terminals on the new switch.

Is it this one? https://www.canadiantire.ca/en/pdp/motomaster-eliminator-booster-pack-jump-starter-usb-power-bank-lithium-ion-750-amp-12v-0111906p.html Many leads and even board sockets can be purchased at a good electronics store locally of via a company like RS Components. https://www.rs-online.com/ ..

no info generic answer fix or replace mystery chuck

check amp draw motor possible overheating --

yes whats wrong with it???

https://www.pts-tools.com/catalogue/product/1653767

Hold the chuck if need be with a channel lock plyers and reverse the drill. Should spin it open.

https://www.wikihow.com/Test-a-Battery-Charger#:~:text=Touch%20the%20black%20test%20probe%20to%20the%20negative,metal%20prong%20at%20the%20end%20of%20the%20jack.

I agree that the pictographs are not very helpful. You probably have one of the new chargers. I have an old one, which is a little easier to figure out. From top to bottom 1. The flashing green light with the electric plug indicates that the unit is plugged in and ready to go. 2. The flashing red little fan means that the battery is too warm so it is just cooling it and not charging it at that moment. 3. The solid red empty battery outline means that it is charging but hasn't got very far, less than 80% full. 4. The mostly full battery outline with both solid red and green lights at the same time means it is 80% full or more 5. The full battery outline and solid green with the musical notes means it is full up. 6. The broken battery outline with flashing red and green means you've got a broken battery. 7. The yellow light with the wrench means the charger is "conditioning" the battery, whatever that means. 8. The yellow light with the fan means "cooling abnormality." Hope this helps

It is telling you that it has communicated and connected to your battery and is charging it. My guess is that it will become a solid green light once it is fully charged. https://www.google.com/search?q=yyhqqbad ..

Posting follow-ups as a new question doesn't work here, because posts are not threaded by user, so this post has no context to your other. https://www.fixya.com/users/george-hausauer Your 'Testimonial' to Steve Pack was not too gracious for his help; Testimonial: "This is useless. I don't need a parts diagram. I already have the new spindle assembly. I want to know HOW to get it apart. Thank you." It would have been better to click the Comment Box below Steve's and and say "Thanks for that, I have a new spindle, do you have any idea how to take it apart"? We do this Expert thing for no pay, and it is often a thankless task. I deleted a post last night for a similar retort to my previous help. If I was second guessing Steve's answer, it was to show you where the fixing screws are. I see three in the nose and one, an allen screw hiding deep inside the chuck that fixes to the end of the spindle. There are very few others. There are two videos here that may help, all models from a company work to a theme. https://www.google.com/search?q=milwaukee+0235-1+disassembly Or take the drill and new spindle to a Milwaukee Serve Centre and have it done professionally with a warranty. Or, you can phone Jack's Small Engines and ask. Good luck and have a great day. ..

You might check with Harbor Freight. Unfortunately the do not carry many repair parts., or check with small electric motor repair shop to see if the can help you. Good Luck

Only with a charger. Lithium is special and has protection circuitry to prevent fires. It is an unstable medium if not treated right. https://www.google.com/search?q=charge+my+%22Milwaukee+M12+Redlithium+XC4.0+battery%22+without+the+charger ..

it can depends on whats damaged or broken off

Here is a parts diagram. If that still doesn't help you call Makita's customer service at 800-462-5482. http://www.toolpartsdirect.com/cgi-bin/schematic.cgi/makita/BHP451

Sorry for your loss. I mean, if it looks like it fits, it probably is the right charger. It is sort of standardized these days like a light socket. Anybody can plug something into the wall.