Regal Ware Kitchen Appliances - Others - Recent Questions, Troubleshooting & Support

Here you are; https://www.ebay.com/itm/204244934731 Mail order.

Nope, haven't solved the problem yet. I got into the wrong category of breadmaker: mine is a regal K6773 "Automatic Breadmaker."

Question moved from Buick "Regal", Cars and TrucksUsually the Google search query 'item X vs item Y' works well in situations like this, and although it finds both manuals, it doesn't say the differences. I see one model is advertised as a 2lb Horizontal bread maker and makes a more traditional shaped loaf. I see one advert showing the pan as ideal for both of the models you mention,https://www.google.com/search?q=Regal+k6743+vs+k6742You don't say which model you have and why you need a new pan, if indeed you do?The search query to find one is Rival "model number" (in Quotes) replacement panLots on eBayhttps://picclick.com/Regal-Kitchen-Pro-Breadmaker-K6742-K6743-Replacement-352559794111.html..

Hi,

The error code E:EE means the breadmaker thinks the temperature is too cool i.e below 59 degrees F or 15 degrees Celsius.
As you say the temperature is actually 65 degrees - then this means that the temperature sensor on the Bread maker has failed and will need to be replaced.

The EEE code and beeping will continue until the failed sensor is replaced and as this is a component failure it cannot be reset unfortunately.

Thanks for using FixYa.

It sounds like your belt is slipping. Yes, just like on a car! Bread machines use a belt drive and yours is probably slipping. Your choices are to replace the belt, or replace your breadmaker in my opinion. You might want to take the bottom panel off and look at your belt and see if there is anything obvious that you can correct. If you do that be sure it is unplugged.

Where did you get the replacement belt ? My brother is looking for a belt for a similar model K6761 which uses the same belt (I think). It is about 24" around and 1/4" wide. It has (3) grooves inside and the backside has many notches. The motor has grooves, it would go on there. Where did you get the replacement belt ? thanks [email protected]

Manufacturer s website or manuals online.com

You may have too dry or too watery a batter. Check your ingredient mix for accurate measurements. Recheck the unit without ingredients in place to be absolutely sure you have the paddle seated correctly. Although most are designed to make it very hard to put the paddle on incorrectly, old dough or batter may harden in place and keep the paddle form fully seating correctly. If you need further help, I’m available over the phone at https://www.6ya.com/expert/steven_7f54ab9063554f66

I have that paddle. You can reach me at [email protected]

Unfortunately no other brand will fit. Try looking in thrift stores as they sometimes have these parts or see brand site.

You don't really have to remove it at all. But pour very hot water into the pan and let it sit for about 10 mins. empty out, be careful it wil be hot then twist the blade it should come off. If not use a pastry brush and paint a little veggie oil on it.

Here is a link to the manual online http://www.manualslib.com/manual/139928/Regal-Ware-K6751.html