Pulsar Watches - Page 4 - Recent Questions, Troubleshooting & Support


Pulsar Watches | Answered on May 03, 2017

Try Googling (pulsar)(nx14)(manual) without parens to get instructions.

Pulsar Watches | Answered on May 03, 2017

Take your watch to a jeweler to open and identify.

Pulsar Watches | Answered on Feb 09, 2017

Any jewelry store can get the band for you. You can also try eBay.

Pulsar Watches | Answered on Jan 25, 2017

call touch of gold
google the number

Pulsar Watches | Answered on Nov 24, 2016

Fixya is not a buying service.

Pulsar Watches | Answered on Aug 20, 2016

This is the serial number. It tells you that the watch was manufactured in April of the first year of a decade (e.g. 1991. 2001, 2011 etc). If it's a quartz watch, it's probably one of the example years shown.

Pulsar Ladies... | Answered on Jun 01, 2016

Y148 is the quartz movement model, 8009 is the case number.
The 491300 is the serial number, which means that the watch was produced in January of either 1994, 2004, or 2014. I have no idea what the A1 in a box is for. I hope this helps.

Pulsar Watches | Answered on Jun 01, 2016

I need battery for pulsar V2325990

Pulsar Watches | Answered on Apr 20, 2016

The model should be stamped on the back plate. Can't help you by looking at a photo of the watch.


Pulsar Watches | Answered on Mar 26, 2016

sadly, if the battery is indeed dead, it's time for a new watch. the cost to replace the battery will be the same as buying another one off ebay, pawnshop, craigslist etc.

Pulsar Watches | Answered on Mar 24, 2016

BATTERY CHANGE The miniature battery SEIKO SR927W which powers your watch should last approximately 2 years. However, because the battery is inserted at the factory, its actual life once in your possession may be less than the specified period.

Pulsar Watches | Answered on Mar 24, 2016

Hi, your battery would be the renata 371. Type it in on eBay and it will come up

Pulsar Watches | Answered on Mar 24, 2016

just put the hour hand forward or back 1 hour

Pulsar Watches | Answered on Mar 15, 2016

To set the timer hand on these models of Pulsar watches, do the following: 
Looking at the face of the watch, there are two buttons and a crown on the right side. The TOP button is Button "A". - The BOTTOM button is Button "B".
There are 3 positions on the crown: IN (#1), FIRST CLICK (#2) & SECOND CLICK (#3).
First, pull the crown out to the second 'click' position (#3) ... This is all the way out. (STOP THERE! Pulling harder will harm your watch! Don't try to pull past position #3!)
Push and hold Button "A" for two (2) seconds. The dial will sweep around to the 12 O'clock position. You can advance the timer while the crown is in position #3 (second click out) to reset it back to the default position. 
The manual says that if you pull the crown out to position #3 while the timer is measuring, the hand will reset back to the 12 o'clock position... I haven't tried that, so I can't confirm.

Pulsar... | Answered on Mar 04, 2016

See PDF here to solve this problem.
Wish Pulsar would have included this info with their watches!

Pulsar... | Answered on Nov 10, 2015

Here is a link to find instructions:


Pulsar 100 Meter... | Answered on Nov 10, 2015

Not finding what you are looking for?
Pulsar Logo

342 questions posted

Ask a Question

Usually answered in minutes!

Top Pulsar Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers


Level 3 Expert

13434 Answers


Level 1 Expert

18 Answers

Are you a Pulsar Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides