Pulsar Answered Questions & Fixed Issues

go here for manual > http://www.pulsarwatches-europe.com/Instruction

really? Pull crown out two clicks and turn it clockwise.

go here > http://www.pulsarwatches-europe.com/Instruction

Hi
I have a soft copy of the owner manual..If you give me your e mail I can sent it in Pdf format.Thanks
[email protected]

I don't know that you can. A watchmaker may be able to help though. Could be the hands are hitting something and stopping the watch.

know it just pulls out

go here > http://www.pulsarwatches-europe.com/Instruction

To restart the watch, you have to short the battery with a pin that sits under a sticker on the back of the watch. The sticker is supposed to explain that. You can usually do it with a pair of sharp scissors or tweezers. Without "jumpstarting" the watch, just installing a new battery won't start the watch. (I don't know why.)

you can set the date of your watch by pulling the crown on its middle position and turn it until it reaches the exact date, remember there are three position of the crown, first the normal position, the middle and the out position. push the crown when you done. i hope this will help you.

Did you check the watch battery? Pulsar watches run a long time! If a new battery does not start it up you can take a can of air and just squirt a little in the area where the battery goes (very gently) to blow out any dirt then install the battery and put back on. If it is still not working you need to take it to your local jewelry store to have an estimate for repair, usually 60.00 to 80.00. I hope this helps!

You can call a company called Coserv they are the main watch repair company for Pulsar. Many times the bezels are not available on the older watches but it is worth a phone call to see. Coserv is the repair service all jewelers use! Coserv in NJ 1-800-722-4452 hope this helps!!

You can call a company called Coserv give them the model number and ask them how to set the watch. They are the main repair company for Pulsar, and are located in NJ. Their phone number is 1-800-722-4452 tell them your local jeweler advised that you call! thank you!

You can mail to Pulsar their repair service is called Coserv they are in New Jersey (may not get them right now with bad weather) or your local watch repair!

Because your timepiece is water resistant to 100m, you may have to unscrew the crown before pulling it out to set the time.

This is a complicated repair, not just a battery exchange. Go to a watchmaker. Probably 40 bucks

Here is a direct link to one Pulsar watch manual with operating instructions:

http://www.pulsarwatches.com/pdf/PUL_PAR_Series.pdf


If that is not the correct manual for your watch, then just click on the following link:

http://www.pulsarwatches.com/home2.asp#FAQ

Then click on the OPERATIONAL GUIDE button in the upper right hand side of that page.
Then just find the model number of your watch in the list and click on it.

To view the User's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the User's Manual.

You may need ADOBE READER installed on your computer to read PDF documents.
You can download this free at WWW.ADOBE.COM if necessary.
Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, the follow the onscreen instructions to install the software on your computer.

Thank you very much and good luck.

Please note that no information was found for a Pulsar 8010 model watch.

You will have to look on the back of your watch for the engraved CALIBRE NUMBER.

Just use your mouse to click on the following link which will open a new webpage for you automatically. Once there you will see a detailed illustration of where to look on your watch for the calibre number:

http://www.fixya.com/PostAnswer.aspx?thid=8784937&ctgid=167&ref=unsl

Once you find your number, just select it from the drop down list on that page in the box labelled INSTRUCTIONS FINDER. Then select ENGLISH as the language, then click on the CHOOSE button right below that.

You should then see your manual open up in a separate window for you to look at.

You may need ADOBE READER installed on your computer to read PDF documents. You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there.

Good luck.

Hope this one will help.
http://www.manualsonline.com/mdownloads/3384714e-63b3-4569-adfd-2f0a09c1eb7a.pdf

Any decent watch repair shop will do that. Type in your browser: watch repairs in (your area) and you should find plenty. Rate me, please.

Hi,

This link can help you with instruction and pictures.

http://www.pulsarwatches.com/pdf/DayDateAnalog_MultiSeries.pdf

I hope this will help you a lot.

Thank you for choosing fixya