Pulsar Popular Questions, Answers, Tips & Manuals

I need battery for pulsar V2325990

Return it to the store you bought it from. I bought something that was similar to your' purchase, but mine was from a garage sale. Thought I got the bargain of a lifetime...wrong!

If it is a screw on back you will need special tools but if it is a push on back you will be able to remove with a small knife

No. Most likely not. Try contacting the manufacturer and give them a description of your watch. They most likely wont be able to help you becuase you need the numbers off the back of the watch in order for them to identify the watch...

here> http://www.pulsarwatches-europe.com/Instruction

Hi, your battery would be the renata 371. Type it in on eBay and it will come up

instructions on link belowhttp://service.seiko.com.au/i/seiko/documents/technicalguides/Y739A.pdf

They have a rechargeable battery in them,you'll have to go to jeweler or a watch repair store.the battery is not cheap!!! I had my wifes fixed a few years ago the battery cost $68.00,but she likes the watch so it was worth it.

Did you have any luck with this issue as mine is doing the same

go here > http://www.pulsarwatches-europe.com/Instruction

go here > http://www.pulsarwatches-europe.com/Instruction

go here > http://www.pulsarwatches-europe.com/Instruction

go here for manual > http://www.pulsarwatches-europe.com/Instruction

I don't know that you can. A watchmaker may be able to help though. Could be the hands are hitting something and stopping the watch.

know it just pulls out

go here > http://www.pulsarwatches-europe.com/Instruction

you can set the date of your watch by pulling the crown on its middle position and turn it until it reaches the exact date, remember there are three position of the crown, first the normal position, the middle and the out position. push the crown when you done. i hope this will help you.

Did you check the watch battery? Pulsar watches run a long time! If a new battery does not start it up you can take a can of air and just squirt a little in the area where the battery goes (very gently) to blow out any dirt then install the battery and put back on. If it is still not working you need to take it to your local jewelry store to have an estimate for repair, usually 60.00 to 80.00. I hope this helps!

You can call a company called Coserv give them the model number and ask them how to set the watch. They are the main repair company for Pulsar, and are located in NJ. Their phone number is 1-800-722-4452 tell them your local jeweler advised that you call! thank you!

If your watch is solar powered the second hand performs this characteristic when it's in need of a charge. Try placing your time piece under a bright light for short time or in direct sunlight and see if this helps you with your problem.