Powerglide Drills - Recent Questions, Troubleshooting & Support

0helpful
1answer
0answers
0answers
0answers
0answers
0helpful
1answer

Need to replace charger (NO.

Hi and welcome to FixYa, I am Kelly.

You can order it on line here: ($10.19)
http://www.acehardwareoutlet.com/productDetails.aspx?SKU=2105054

Thanks for choosing FixYa,
Kelly
5/5/2011 11:58:27 AM • Powerglide Power... • Answered on May 05, 2011
0helpful
1answer

The trigger gets stuck on and needs to adjusted to

Give it a good squirt of WD40 and operate the trigger a couple of dozen times after removing the battery.
Paul
9/18/2010 2:21:51 AM • Powerglide Power... • Answered on Sep 18, 2010
0helpful
1answer

Should the red light on the battery charger stay

I am not familiar with this model, but most chargers have a flashing light as the battery charges, and a solid light when it is charged. Do you have the manual? It should tell you what the lights mean.
7/17/2010 6:18:19 PM • Powerglide Power... • Answered on Jul 17, 2010
0helpful
1answer

We're can I get a charger for a power devil drill driver PDX96CDB/2

£12 for the whole kit if is is like this one? https://www.google.com/search?q=power+devil+drill+driver+PDX96CB ..
3/29/2024 6:37:41 PM • Drills • Answered on Mar 29, 2024
0helpful
1answer

What is the wiring diagram for a Century model 87151 battery charger?

Where does the white wire inside the battery charger go to it came undone and I don't know which prong goes to
3/7/2024 5:12:57 PM • Drills • Answered on Mar 07, 2024
0helpful
1answer

Bauer lithium 20 volt drill is dead off the charger. 20 volt 1/2 drill/driver. Model #1791c-b1. Problem happened today, 2-27-2023.

Check the battery has charged or the voltage is high enough to accept a charge.
3/1/2024 9:20:56 AM • Drills • Answered on Mar 01, 2024
0helpful
1answer

Can I fix a 20 volt lithium Bauer drill that won't turn on after removed from battery charger?

If the battery goes flat, the charger may ignore it and it will never charge.
2/27/2024 9:06:34 PM • Drills • Answered on Feb 27, 2024
0helpful
1answer

How to remove oven door Maytag mgr5775qds

To remove the oven door on a Maytag MGR5775QDS range, you can follow these general steps:
  1. Open the oven door completely to access the hinges.
  2. Locate the hinge locks on both sides of the door. These are usually small levers or clips.
  3. Use a flathead screwdriver or your fingers to flip the hinge locks toward the oven cavity, releasing them from their locked position.
  4. With the hinge locks released, close the oven door halfway.
  5. Lift the oven door up and off the hinges by pulling it toward you and lifting it away from the oven.
  6. Place the oven door on a flat surface, such as a table or countertop, to work on it or store it.
Remember to exercise caution when handling the oven door, as it may be heavy and awkward to maneuver. If you're unsure or uncomfortable with removing the oven door yourself, it's always a good idea to consult the appliance's manual or contact a professional for assistance.
2/17/2024 5:19:51 PM • Drills • Answered on Feb 17, 2024
Not finding what you are looking for?
Powerglide Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Top Powerglide Drills Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66827 Answers

john h

Level 3 Expert

29494 Answers

Steve Pack
Steve Pack

Level 3 Expert

7121 Answers

Are you a Powerglide Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...