Maxell Electronics - Others - Recent Questions, Troubleshooting & Support
Cant open pictures on CD-R
Take the cd back to the PC that burned it and make sure the session has closed. Open a picture to see if works. If the session IS closed then you need to have software for viewing pictures updated.
One day old and ERROR ?? NO SD...
at the command prompt type chkdsk X: /f /r where X is pen drive.If it doesn't work download the recovery tool here http://freeware-fix.blogspot.com/2013/04/usb-drive-is-unreadable.html
The tape broke and I am trying to put it back
I have done this,carefully take the cassette apart,by removeing the screws,be sure and look at how it is assembled.
Remove both spools of tape.In the break area cut with a razor blade each sides of the spools so you have a smooth surface on the tape.
lay them on a flat surface,pointing towards each other,be carefull not to drop the spools.Put one (little) drop of supperglue on the tape,then put the other end of the tape on top,make sure the alignment is straight and you dont glue the tape to youre work area.Wait about five minutes,then reassemble. Works like a charm for me.
Voltage chart
anything less than 3 volts, they are cheap on Ebay or amazon, i do not buy them local anymore, I can get 25 for the price of 1.
Firmware version
you need a firmware version of your card? what for?not sure if they even have firmware versions and if they have nobody can help you would need to look it up yourself
9/25/2013 5:12:49 AM •
Maxell...
•
Answered
on Sep 25, 2013
Not finding what you are looking for?