KitchenAid Food Processors - Answered Questions & Fixed Issues
Drive adapter and Disc adapter stuck together
Stephanie Interbartolo
You are tagging a question that is 10 year old!
And the area you posted is where Experts ask the Original Poster for further information before committing to an answer!
Better just to make your own question.
'make model (what it is)' as first 3 words, a clear question and that great picture.
Spray WD40 into those slots. Have someone hold that ring over the edge of a worktop. Hold that lip on the left edge lip of the left piece with a pair of slip joint pliers, then tap the slip joint pliers with a small hammer to tap the two pieces apart. Then wash in soapy water to wash off the WD40.
..
4/10/2024 2:39:34 PM •
KitchenAid...
•
Answered
on Apr 10, 2024
•
446 views
How can I get kitchen aid blade out that is stuck
The blade will be stuck on the shaft and both will be damaged and require replacement. With that knowledge you now understand that drilling a hole sideways through the blade cap isn't wrecking anything you are going to use again. You can then get something into the hole for leverage. Here in NZ blades are under $20 and motor shaft sleeve is about $5. If you don't replace the parts it will happen again.
11/9/2021 8:40:01 PM •
KitchenAid...
•
Answered
on Nov 09, 2021
•
2,278 views
Disc stem stuck...can't pull it off.
Hey I had the same problem. This may sound primitive and stupid but it worked. Give the stem a good whack with a wooden spoon all the way around, it will come off.
6/24/2021 8:43:21 PM •
KitchenAid...
•
Answered
on Jun 24, 2021
•
7,233 views
Lid is stuck in wrong direction will not come off
I got the lid off by using a turkey-skewer (i.e., a long pin) to push down on the long white plastic piece, in the handle, just above the spring.
When you push it down far enough, you can twist the cover back over to the proper side.
(We think we created this situation ourselves by mistakenly twisting the cover into place clockwise, rather than counter-clockwise.)
Just stopped working
Most often when that model processor stops working it is associated with the mechanisms in the lid and bowl that activate the safety switch that prevents you turning it on when the bowl & lid is not on correctly. The mechanisms are not repairable, the fix is to replace the bowl or the lid or both. A proper KitchenAid service agent should have both in stock, take your complete machine in so that the faulty part can be identified.
12/2/2017 6:15:15 PM •
KitchenAid...
•
Answered
on Dec 02, 2017
•
1,107 views
Motor won't start when bowl locked in position
Hi, I had the same problem with my KitchenAid KFP740. The fix was the handle cap was loose. We all have a tendency to lift the unit out of the cabinet by the handle and it is heavy! The handle has a mechanism inside. The outside piece of the handle that holds it all inside gets loose making the pin at the bottom of the bowl not reach where it needs to be when you put the lid on. If you assemble the unit and squeeze the top of the handle after you put the lid on mine would work. A little gorilla glue and I was back in business!
11/2/2017 10:27:54 PM •
KitchenAid...
•
Answered
on Nov 02, 2017
•
502 views
Not finding what you are looking for?