Indesit Logo

Indesit Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 116 Products
  • 3K Answers
  • 187K Views

F06 - Door lock fault
Issue: Washing machine door cannot be opened or closed/when the door is closed the machine the programme will not start.
Advice: If your washing machine door will not close, please check for any obstructions in the door lock.
OR,
Switch off the device. Disconnect power. Wait about 3 minutes.
Open the door, then close. Reconnect device to the network.
Start device.

Cause: Door lock fails to close / open door lock triac open / closed,
frequency signal fault

Dado

Indesit Washing... | Answered on Jan 02, 2020


Lots of great replies, but I narrowed my "3 beeps" during wash to my daughter putting too much washing in the machine. It seems to have an 'overload' sensor that beeps when it detects too much weight. I initially thought it to be a blocked pump, but noticed it was beeping during washing cycle without the pump running. So worth trying a little less in the machine before you start taking things apart.

Indesit Washing... | Answered on Oct 21, 2019


F05 means pressure switch jammed on full.
Remove lower rear panel of washer.
Remove large black hose on bottom of drum.
Remove and clean filter inside hose.
Refit and test.
Please rate my solution.
Thankyou.

Indesit W 123... | Answered on Sep 26, 2019


Google (indesit)(D3000 WI - 1)(manual) without parens OR contact Indesit directly to request.

Indesit Washing... | Answered on Aug 18, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Indesit Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

ray gallant

Level 3 Expert

66473 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you an Indesit Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...