IFB Washing Machines - Answered Questions & Fixed Issues
How to drain water from ifb top load washing machine
If you've ever had to deal with a flooded laundry room, you know how frustrating it can be to figure out how to drain water from an IFB top load washing machine. Fortunately, it's not as difficult as it may seem.
First, you'll need to locate the drain hose. This is usually located at the back of the machine, near the bottom. Once you've located the hose, you'll need to disconnect it from the machine. Then, you'll need to place the end of the hose in a bucket or sink.
Next, you'll need to turn off the power to the machine. This is important for safety reasons. Once the power is off, you can turn the water supply off. Then, you can turn the machine on and let it drain.
Finally, once the water has drained, you can turn the power back on and reconnect the drain hose. And that's it! You've successfully drained your IFB top load washing machine.
Now that you know how to drain water from an IFB top load washing machine, you can rest easy knowing that you'll never have to deal with a flooded laundry room again.
4/16/2023 9:16:18 PM •
IFB Washing...
•
Answered
on Apr 16, 2023
•
98 views
My ifb machine showing EAP error
Try resetting your washing machine then. Press the power button to restart the washing machine and in other cases, if the machine has a Cancel button then push it to clear the error and then push the Pause or Stop button to reset it.If the error message still shows up then the washing machine needs to be looked at from a repair person that fixes major appliances.
2/12/2021 11:15:20 PM •
IFB Washing...
•
Answered
on Feb 12, 2021
•
16,912 views
How to solve ach1 error in ifb topload washing machine
If input voltage is too high then AC H1 error will come. So wait for sometime to stabilize the voltage then washing machine will start automatically. If not then call to your electrician to solve the power fluctuations
Laundry load is unbalanced. If laundry load is small. It can lead to an unbalanced condition. Add 1-2 similar items to help balance the load and rearrange load to allow proper spinning.
1/17/2021 7:58:50 AM •
IFB Washing...
•
Answered
on Jan 17, 2021
•
2,530 views
IFB washing machine front load Showing ' Lo' what
In IFB Machine LO Error Code indicates Low Voltage Problem. We have the best quality Automatic Voltage Stabilizers. Gelco Automatic Voltage Stabilizer GA400 model will solve your problem. GA400 Voltage Stabilizer to up or down your incoming Voltage from GEB. It has a capacity of 12 amp and 15 to 20 Voltage up / down capacity.
We are sure this Gelco GA 400 model will solve your problem.
You can Call on: 9722658052 or 9427347880
Thank You
1/17/2021 7:44:38 AM •
IFB Washing...
•
Answered
on Jan 17, 2021
•
8,071 views
Top loader. What does E4 error indicate?
The E4 error indicates insufficient water for washing. This could be due to a restricted supply faucet, an inadequate supply, or a defective level sensor. Another possibility is a clogged or kinked drain hose.
1/5/2021 5:42:55 PM •
IFB Washing...
•
Answered
on Jan 05, 2021
•
2,449 views
Not finding what you are looking for?