Hamilton Beach Recent Questions, Troubleshooting Help & Support

Go to this link to get manual

http://www.hamiltonbeach.com/use-and-care/use-and-care.php

Good luck and please rate fixya!

Sounds like you have a short some place, and it needs to be replaced.

You didn't specify which model so I'll speak generically.

Look for a button called "settings". Under the settings menu you should see a "clock mode" or similar. Select the "12 hour" setting for civilian time.

We do not have part location services here.

Unplug machine. you will need to remove the cover. carefully. The the capacitor. usually after not running for an hour or so the capacitor will completely discharge on its own. looking at the back of the control board, you ill see a small round, usually black cylindrical part about 1/2 inch high with a hole in it. cover the hole with a couple small pieces of duct tape. this will mute the daylights out of it. to eliminate sound completely you will need to unsolder this part

Purchase manual and used oven on eBay. Several listings with manual such as the one below: https://www.ebay.com/i/192891163480?chn=ps

No, replace it. You run the risk of fire.

That little screen that lies at the bottom of the bucket needs to be snapped out and the washer replaced. You have to unscrew the bottom, carefully remove the spring loaded lever, ( don't loose the spring) After fishing the lost rubber washer out of the hole, I used a screw driver or other similar item to pop the screen out. ( use care not to poke a hole in screen.) Next replace lever and spring and push the Star ended piece through the bottom and THEN fasten the washer. Replace all excess pieces and it should be fixed provided the washer isn't badly worn. This is the only way I know how to fix it after countless different web pages and searches.

Return under warranty. Although probably only the lid switch not engaging you'd be better off replacing.

Push in on silver button on top if that don't work take a knife and pop it open.

This noise may be due to turn table motor or due to cooling fan confirm by checking thoroughly both the components,if it is turn table motor than only replacement is solution,in the case of fan, clean and put some oil to rectify.

Easy way is to get online or go down to your favorite store and buy a new coffee maker.

There is no reset, You will have to replace iron. Based on the price there are repair parts available.

I just ordered a drive belt from https://www.goodmans.net/ for Hamilton Beach/Proctor Silex Food Processor Type: FP03 Model: 702R for $7.99 + shipping.

I recently had this same issue - it turned out that the lock switch no longer engaged because the spring came out of alignment after the unit was dropped. Chances are you have a similar issue. You can test this by using a small screwdriver to press down on the safely latch and then pressing the ON/OFF (careful of the blades!!). then you can easily fix it.

12h time vs 24 hour time, after 12:00 PM time then goes to 13:00 = 1:00 PM

Take the big number and -12 to it

15:00 —-> 15 - 12 = 3:00 PM
22:00 —>. 22-12 = 10 PM

First turn to right is warm, then low, then high.

Here is a link for photo of knob http://www.hamiltonbeach.com/all-slow-cookers-stay-or-go-6-quart-slow-cooker-33162r.html#

Likely the upper element has failed or the contact for it has failed. Either way, likely not worth repairing.