Gaggenau Dishwashers - Recent Questions, Troubleshooting & Support
My Gaggenau dishwasher squeaks very loudly when the door is opened and closed. Tried using WD40but it just comes back. Dishwasher is 13 months old
Hello,
Try to determine the area where the squeak is coming from. Does it happen as you are opening the door. On many models it is caused by the rollers, and/or the springs that counter-balance the door. WD-40 does a lot of things, but long lasting lubrication is not one of them. Try a silicone or teflon grease in the roller bearing axle. Also try to put some kind of plastic sleeve over the hook of the spring as it attaches to the frame of the dishwasher. If it still squeaks after you've tried these suggestions, you may need to replace the spring tension rollers, they're not too expensive. Hope this helps.
6/15/2019 6:50:55 PM •
Gaggenau...
•
Answered
on Jun 15, 2019
Replaced timer switch water not stop filling
COULD BE THAT THE WATER INLET VALVE IS BAD ALLOWING WATER TO FLOW EVEN THOUGH IT IS SUPPOSE TO CUT OFF WHEN FLOAT REACHES THE TOP. MAKE SURE THAT THE FLOAT LOCATED IN FRONT OF DISHWASHER IT IS ROUND , MOVES UP AND DOWN FREELY
4/11/2014 4:16:45 AM •
Gaggenau...
•
Answered
on Apr 11, 2014
Not finding what you are looking for?