Fuji Cameras - Page 7 - Recent Questions, Troubleshooting & Support

You might as well replace the camera in this case.

Here you go... Support and Contact Center

Try the procedures in this tip.

First of all, you should stop saving any new files to you canon camera (or SD card) or taking new pictures with you camera. Then find this card recovery software here Here are the steps: Step 1: Download and install the Digital Photo Recovery Software fromhttp://www.asoftech.com Step 2: Connect your camera (or SD card, memory card etc) to you PC Step 3: Scan the source drive where your lost pictures located. Step 4: Recover the lost pictures and save them to another drive instead of the source drive.

Take it to your local service centre - sounds as if there is a glitch in the electronics. I presume you have followed all the troubleshooting advice in the manual, including performing a reset?

Return it as unfit for purpose

It often helps to specify the make and model If it has a separate button battery that stores the settings, replacing it should solve your problem otherwise try replacing your batteries

take the memory card out camera and plug it into lappy

The lens probably has some dirt or pocket fuzz caught in it. Try spraying around it with a can of compressed air when it is extended. Also spray the lens.

Make sure Lock Unlock button on memory card is in UNLOCK position. Sometimes sliding the card into computer slot moves the button. Be careful to put it in straight.

http://www.fujifilm.com/support/digital_cameras/software/finepix_viewer/ver55win/download.html

saya mempunyai camera samsung ES95 baru dua bulan 4 bulan entah knpa pas saya mau pakai terus saya hidupkan/ tekan tombo; power nda mau nyala2 padahal kamera saya aman2 ajx kondisi sebelum saya hidupkan batrai full kondisi nda aman ada yang tau nda gaimn cara hidupkan terimakasih ???