Fuji Recent Questions, Troubleshooting Help & Support

The answer is still the same

The "W" indicates that it is a recoverable error. The "24" indicates that there is a problem in the paper feeder. The "25" indicates that it is a laser printer problem. Looks to me as though you have a paper jam.

Yes, it can be done. Here are the steps to copy them over:

1. Turn on your camera
2. Press the button to view the pictures you have taken (the button that has the green sideways triangle with the green square around it).
3.Press the Menu/Ok button
4. Arrow down to "Copy"
5. Press the Menu/Ok button
6. To copy the photos from the internal memory to an SD card simply hit Menu/ok button again.
7. Arrow down to "All Frames" and then press Menu/Ok
8 It now asks you to confirm. To continue copying the pictures over, press Menu/Ok again.
9. It will now begin copying your pictures over.

There you go. Hope this helps!

If the command dial on your Fuji Finepix S9800 camera is overly sensitive, making it difficult to select items on the menu or adjust settings, there are a few steps you can try to address the issue:

1. Clean the dial: Sometimes, dirt or debris can accumulate around the command dial, affecting its sensitivity. Use a soft, lint-free cloth or a small brush to gently clean the area around the dial, removing any particles that may be causing the sensitivity issue.
2. Adjust the sensitivity settings: Check the camera's menu or settings to see if there are any options to adjust the sensitivity of the command dial. Look for settings related to "dial sensitivity" or "control dial response" and experiment with different levels to find the one that suits your preferences.
3. Reset the camera settings: If the sensitivity issue persists, you can try resetting the camera settings to their default values. Look for the "Reset" or "Factory Reset" option in the camera's menu and choose the appropriate setting. This will restore the original settings and may help resolve any software-related issues.
4. Contact customer support: If none of the above steps resolve the sensitivity problem with the command dial, it may be worth contacting Fuji customer support for further assistance. They can provide specific troubleshooting steps or advise you on whether the camera needs to be inspected or repaired by a professional technician.

It's important to handle the camera with care while attempting any adjustments or cleaning. If you are unsure or uncomfortable with the process, it's recommended to seek professional help or take the camera to an authorized service center to avoid any potential damage.

It should be one of these https://www.ebay.com/b/OSRAM-240V-Movie-Projector-Bulbs-Lamps/15251/bn_107852395 or here https://www.ebay.com/b/OSRAM-240V-Movie-Projector-Bulbs-Lamps/15251/bn_107852395 ..

2003 made (first one) is 20 years old. the batteries are NO GOOD this sold period so buy batteries and charge them. sold mine 19 years ago free manual is here https://www.manualsbase.com/manual/download/113285/ The 2HR-3UF includes 2 pieces of high-capacity AA-size Ni-MH (nickel-metal hydride) batteries. read page 119 oddly the 5vdc power pack with camera does not charge this battery set x4 only standalong battery chargers work seen on page 116 BK-NH2 or generic.

Question edited for clarity and correct name of camera, plus typos. Question moved from 'Pix Cameras' category to a better one. Videos that may help, but I would advise taking it to a local camera shop for professional repair. https://www.google.com/search?q=fine+pix+jx+360+lens+cap+repair ..

You may download a copy of the manual here. If you have a specific question, feel free to ask.

Based on the serial number provided, it appears that the Fuji bike was manufactured in 2011. The "10" in the serial number indicates the year of production, with the "C1" indicating that it was produced in March of that year.

Question edited for clarity and correct name of the camera! So much easier when you add the make and model! https://www.google.com/search?q=Fujifilm+FinePix+S5600+windows+10+software Fujifilm send you elsewhere for software and drivers ..

It sounds like there may be an issue with the ECO switch on your Fuji micro XE-SF 3700 generator. The fact that the A/C power output cuts out and the motor high revs when the ECO switch is set to handle a heavier load, and that there is no power when the switch is set to economy mode, suggests that the switch may not be functioning properly. It is possible that the switch may be faulty and needs to be replaced. I would recommend consulting the manual of the generator or contacting the manufacturer for further assistance. A professional technician should be able to diagnose and fix the problem. It is also possible that there is a problem with the generator's voltage regulator or control circuit. These are complex systems, and it may be best to have a qualified technician diagnose and repair the issue.

You want to set the focus mode to S-AF, then move the focus mode selector to the lock position.
Hopefully that will fix the problem.

Hi, Please look on the front cover of the camera's box or it's manual for a number followed by MB or GB and that number should be the answer to your question. And please double check (in the manual) that the camera does have a memory separate from any default sd card that comes with the camera. Thank you.

yes

Photos viewed on the camera screen usually appear to have "better" quality than on your computer screen because the tiny camera screen masks out many of the defects that are there. The computer screen is big and will show all of the defects clearly.

Dear Deemax1,
There are hundreds of software available on internet to convert avi to wmv or to any other file format. I searched Google with "avi to wmv converter" and I received about 5,250,000 results. Please download any free software and that should do the trick.

Hope that helps. Please let me know in case any further assistance is required.

Regards,
Srinivas.