Eagle Floor Polishers & Buffers - Recent Questions, Troubleshooting & Support

Use your volt meter to test the battery voltage. It should be at least 12.4v . I this is good, follow the voltage through the ignition switch and the relay if it has one, on to the starter. If you have power on to the starter, but still no crank, the starter is bad.
Hope this helps, Robert

Eagle Propane... | Answered on Oct 31, 2018

Any janitorial supply in your town, or ebay. Your Home Depot or Lowe's may have them as well as Amazon.

Floor Polishers... | Answered on Jun 28, 2019

The rectifier is in the top end of the motor. Take the cover off and then the top end plate of the motor. With the bolts removed, you will have to tap and rock the plate to evenly remove it. Carefully look at the marks on the old and new part to be shur you do not make a mistake in the wiring. A drawing and photo might be nice too.

Floor Polishers... | Answered on Jun 28, 2019

What exactly is the question here?

Is this a corded electric Scrubber or a battery one?

Floor Polishers... | Answered on Dec 27, 2016

Timber Floor Sanding and Polishing Melbourne

Use this guy, i have used them before & they are very affordable & professionals for sure

Floor Polishers... | Answered on Mar 29, 2016

motor bearing worn or shaft bent.

Floor Polishers... | Answered on Aug 10, 2014

Wax remover. Rewax spot after removing wax.

Floor Polishers... | Answered on Aug 10, 2014


Floor Polishers... | Answered on Aug 10, 2014

Not finding what you are looking for?
Eagle Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Eagle Floor Polishers & Buffers Experts

Robert Wooley
Robert Wooley

Level 2 Expert

177 Answers

Bishop and Son...
Bishop and Son...

Level 1 Expert

5 Answers

Are you an Eagle Floor Polisher and Buffer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides