Having issues with logging into the cisco softphon...
Make sure that the subnet for the call manager is available over your VPN if you have locked the tunnel down. Also make sure that the IPC is allowed to bind to the VPN virtual network card.
Hope that helped!
12/6/2022 5:33:16 PM •
Cisco IP...
•
Answered
on Dec 06, 2022
Edb to pst recovery
If you are looking for a solution to recover
EDB file into PST format then you can try Eseutil/R command provided by Microsoft in order to repair corrupted or damaged EDB file. In case if your trouble still remains same then you can go for a third party tool as there are plenty of options available over the net.
5/11/2022 6:12:25 AM •
Cisco PIX...
•
Answered
on May 11, 2022
HP Photosmart C4780 and Acer Aspire fight over web-based printing!
Try hard-wiring your laptop to the router with an ethernet cable as a test and then try printing, if you do not loose connection to the internet then the problem is probably that the printing is hogging your wireless bandwidth.If the same thing happens with loosing connection to the internet try connecting to the internet real quick through another computer that is hardwired, you want to find out if the problem is a wireless one or that affects wired computers also. You might need a driver upgrade, you also might need to upgrade the firmware of the router
How do I download photos & videos to my PC?
With all digital cameras the maker delivers a CD (DVD) with software to install on your computer. This makes it possible to put the pictures from the camera on any computer. On the disk(s) are drivers for all operating systems that need them. (Windows 7 and up do have all drivers for hardware that is certified by Microsoft) And there are programs to download the pictures from the camera to the PC. Sometimes the manufactures also delivers software to organise the pictures in folders and software to view or even enhance the pictures you shot.
When you lost the disk, most of the time you can get the software on the website for your brand. Sometimes you even get newer, updated software and new drivers if needed.
If you can't get software form your brand, you always can install other generic software like Ulead, Pixir, BeFunkey, Gimp, Photoshop express. Or if that is not possible you could install an external memory card reader and download the pictures via de memory card reader.
Reset password Catalyst 4006 Ethernet Switch
Hi,
Depending on the Supervisor Module model, most likely it's a standard Cisco's "password recovery procedure":
Connect to the console
Reboot the switch (power cycle)
Start pressing Ctrl-C till you get to the BOOTROM
Change boot configuration register to 0x2142 (confreg 0x2142)
Boot the switch. It will ignore confuguration and boot "empty".
Go to "enable mode".
Copy startup configuration to running configuration ("copy start run")
Change boot register back to 0x2102 (conf t -> conf 0x2102)
Write config (write mem)
Reboot
Good luck,
Mike / CCNP, CCDP, CCSP, CCVP
Headset Adapters for office phone system
Fails post test:
POST: Inline Power
This is usually caused by a bad async controller where dc voltage is not supplied to the ports. There is nothing you can fix to make it pass the check.
Not finding what you are looking for?