Canon Office Equipment & Supplies - Page 9 - Recent Questions, Troubleshooting & Support


You may download software and drivers from here.

Canon PIXMA... | Answered on Nov 23, 2019


how to install the canon pixma ip1980 printer without cd

Canon PIXMA ... | Answered on Nov 23, 2019


Try this download. Hope this helps!

http://downloadnew.org/drivers/printer/canon-pixma-mp287-driver-508472.html

Canon Pixma... | Answered on Nov 23, 2019


Hi,
CANON PIXMA MP160 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just Click here.
a5f9ef6.jpg
For find any other Hardware solution just Click here.
9a0421f.jpg

Canon PIXMA ... | Answered on Nov 23, 2019


So what does the error code allude to? Lens? software? Connections? Unless you know what the code stands for how you or anyone be expected to fix it?

Canon Office... | Answered on Nov 23, 2019


You are having a fan error. The fan is not operating properly. Here is a copy of the error section from the manual.

Canon Office... | Answered on Nov 23, 2019


https://printcopy.info/?l=en&mod=erc&brand=Canon&model=iR2420

Quoting from link above;

  • Code: E001-0001
  • Description:Abnormally high temperature (detected by sub thermistor)
    The sub thermistor detected an abnormally high temperature (295 deg C) during temperature control.
  • Remedy:- Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB.

Canon Office... | Answered on Nov 23, 2019


Canon ImageRUNNER 3235 error code E000804-0004.. Solution for this error code is to replace the cooling fan.

Canon... | Answered on Nov 22, 2019


Cleaning your head might resolve your problem. Perform the below steps to clean the head:

Print Head Cleaning / Head Refreshing If the printed nozzle check pattern is broken, missing, or a specific color is not printed, clean the print head (Cleaning) or print head deep cleaning (Deep Cleaning). Note:
  1. Cleaning the print head consumes a small amount of ink. Cleaning too often reduces the amount of ink in the ink tanks.

  2. Print head cleaning is performed when you connect the power cord. Your machine may perform print head cleaning periodically to avoid clogging.
Overview:
Step1:
Print the Nozzle Check Pattern.
To check whether the print head nozzles are clogged, print the Nozzle Check Pattern.
downicon.gif If the print quality is poor, perform print head cleaning.
Step 2:
Perform print head cleaning.
This unclogs the print head nozzles
Print the Nozzle Check Pattern again.
To check whether the print head nozzles are clogged, print the Nozzle Check Pattern.
If the print quality is still poor, perform two print head cleanings.
downicon.gif Print the Nozzle Check Pattern again.
Step 3:
Perform deep print head cleaning.
This is a more powerful cleaning.

Displaying the Maintenance screen
  1. Ensure that the printer is powered on.

  2. Press the <Menu> button.

  3. Press the left or right cursor to select [Maintenance/settings], then press <OK>.

  4. Press the left or right cursor to select [Maintenance], then press <OK>.

Print Nozzle Check Pattern
  1. Press the Open button to open the output tray.

    mp500_openbutton.gif

  2. Load letter-sized plain paper in the auto sheet feeder (ASF) or the cassette.

  3. Display the Maintenance screen on the printer.

  4. Press the up or down cursor to select [Nozzle check], then press the <OK>.

    mp800_nozzlecheck.gif

  5. Press the up or down cursor to select [Yes], then press <OK>. (The nozzle check pattern is printed.)

  6. Confirm the nozzle check pattern.
05sj00160_03a.gif 05sj00160_03b.gif < 1 > The normal nozzle check pattern
< 2 > The abnormal nozzle check pattern
< 3 > Some black ink lines are broken.
< 4 > White lines are present in the color ink pattern.
< 5 > Both black and color inks are not present.

Note:
  1. When all patterns are printed normally, press the up / down cursor button to select "All A" and press the OK button.

  2. When any patterns are printed abnormally, press the up / down cursor button to select "Also B" and press the OK button.
Print Head Cleaning:
  1. Display the Maintenance screen on the printer.

  2. Press the up or down cursor to select [Cleaning], then press <OK>.

    mp800_cleaning.gif

  3. Press the up or down cursor to select [Yes], then press <OK> to start print head cleaning.

    Note:
    Do not do any other operations until print head cleaning is completed.


  4. Print the nozzle check pattern and check the print head status.
Deep (Print Head) cleaning:
  1. Display the Maintenance screen.

  2. Press the up or down cursor to select [Deep cleaning], then press <OK>.

    mp800_deepcleaning.gif

  3. Press the up or down cursor to select [Yes], then press <OK> to start print head deep cleaning.

    Note:
    Do not do any other operations until print head deep cleaning is completed.


  4. Print the nozzle check pattern and check the print head status.

    Note:
    If the printed result does not improve even after doing print head deep cleaning, turn off the printer. Then, after 24 hours or later, do print head deep cleaning again. (After a given time interval, ink could dissolve itself, resulting in ink unclogging.)

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Canon Pixma... | Answered on Nov 21, 2019


Problem with fixing unit

Canon IR2870... | Answered on Nov 21, 2019


check the developing unit, gears get clogged sometimes

Canon Office... | Answered on Nov 20, 2019


I can email you the service manual for 15 pounds UK

Canon... | Answered on Nov 20, 2019


Hi there,
When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the print head nozzles are probably clogged. Follow the procedures below to clean the nozzles.

Step 1 : Printing the Nozzle Check Pattern.
If white stripes are noticeable
Step 2 : "Aligning the Print Head"
If print quality is poor
Step 2 : "Print Head Cleaning"
if the problem remains
Step 3 : Print Head Deep Cleaning"
if the problem still remains
Step 4 : Replacing Ink Tanks.

Note : * If the ink tank replacement does not resolve the problem, contact the Customer Care Center.
* You will be alerted if low ink warning is enabled.
* When the Maintenace button on the operation panel is pressed, the maintenance mode is shown. Numbers and functions that can be selected on the maintenance mode as follows :
01 : Printing the Nozzle Check Pattern
02 : Print Head Cleaning
03 : Print Head Deep Cleaning
04 : Aligning the Print Head
05 : Reset the ink counter.
06 : "Display" or "Not Display" remaining ink volume.
07 : Date and order setting.

Printing the Nozzle Check Pattern : Print the nozzle check patterb to determine whether the ink ejects properly from the print head nozzles and to verify print head alignment. Use this function when printed results are blurred or the color is incorrect,
1) With the printer on, load a sheet of Letter paper in the printer.
2) Print the Nozzle Check Pattern.
a) Press the Maintenance button,
b) The Maintenance icon and 01 appear on the LCD.
c) Press the OK button. The nozzle check pattern is printed.
3) Examine the nozzle check pattern output by the printer.
a) Lines missing in this pattern indicate that the print head of black ink requires cleaning. Perform the Print Head Cleaning.
b) White stripes in this pattern indicate that the print head of color ink requires cleaning. Perform the Print Head Cleaning.
c) Uneven patterns indicate that the print head requires alignment.
Perform Aligning of Print Head.
d) Noticeable white stripes in this pattern indicate that the print head require alignment.
Perform Aligning of Print Head.

Print Head Cleaning : Clean the print head if you suspect that the nozles might be clogged. Cleaning the print head consumes ink, so perform print head cleaning only when necessary.
1) Ensure that the printer is on.
2) Start print head cleaning.
a) Press Maintenance button.
b) Press right arrow once to display 02 on the LCD.
c) Press the OK button.
Important : Do not perform any other operations until the print head cleaning finishes. This takes about 50 seconds.
Note : After the print head cleaning finishes, print the nozzle check pattern to verify that the print head nozzles are clean.
If the problem persists, perform printhead deep cleaning.

Print Head Deep Cleaning : If print quality does not improve by standard print head cleaning, try print head deep cleaning, which is more powerful process. Print head deep cleaning consumes ink, so perforn this procedure only when necessary.
1) Ensure that the printer is on.
2) Start Print Head Deep cleaning.
a) Press Maintenance button.
b) Press right arrow twice to display 03 on the LCD.
c) Press the OK button.
Important : This process takes one or two minutes to complete so simply wait until the Power lamp stops flashing.
Note : After printhead deep cleaning finishes, print the nozzle check pattern to verify that the printhead nozzles are clean.
If the printhead is still not clean after the second deep cleaning, replace the ink tank.
If ink tank replacement does not resolve the problem, the print head may be worn out. Contact the Customer Care Center.

Hope this helps.
Please rate my response.
Thanks.

Have a good day.

Canon i475... | Answered on Nov 20, 2019

Not finding what you are looking for?
Canon Logo

81,994 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2276 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...