Canon CanoScan - Answered Questions & Fixed Issues

Disconnect the usb (which is the power source) to the printer. Next, install the printer driver. If you don't have it handy, get it from the Cannon site where you will locate it by Computer model. Download it, double click upon it to install it. Keep an eye on the name of the file as you download it because you will have to find it on your computer.) Next, check that the driver was installed in Device Manager. (Look in Printers) After that, plug the usb back into the printer, powering it. Turn on the printer. Your computer should detect it shortly, automatically. If it does not, turn off everything. Turn back on the computer. Turn on the printer. Good luck.

Is your Scanner locked ? If yes then you will see there's a solid plastic backing on the inside of the lid that needed to be removed. Also remove all protective plastic too.

Firstly you need to download the latest Canon MF Toolbox from the Canon website. . Once downloaded, install the application. Once installed, right click on the application icon and select Move to the compatibility tab and select the checkbox behind "Run this program in compatibility mode for" From the drop-down list, select "Windows 7"

Perhaps you have forgotten to unplug the scanner before scanning? That's what happened to me. I kept getting different error codes, 5,202,63 or 5,202,52 or 5,202,54 and also a message that the driver was not in the TWAIN folder. According to the help file the problem might have been due to my nfts file system. I also tried downloading various new drivers. Nothing helped until I noticed that I had not unplugged the scanner!

I worked round it by ditching my Canon scanner. I wil replace it with one from a manufacturer who is more Linux friendly.

Unplug and plug fully jack of the lamp.

Me ocurre lo mismo. Alguna idea?

you can downlaod from here

how to release the lock swith to detack USB cable and reconnect?

I foun d this ..
https://canon-driver.org/canoscan-4400f-driver/
I hope that will helped

If its for the LiDE 25 or similar model than try

https://www.canon.co.uk/support/consumer_products/products/scanners/lide_series/canoscan_lide_25.aspx?type=drivers&language=&os=

It may work or it may not it all depends on the Operating System youre using on computer. The page lets you chose the OS.

Cheers.

Well I had a code 15 error with mine LIDE 20. Apparently the scanner needs a certain amount of power to run off the USB port. So I changed the USB port and problem fixed

you have to run wire from you main router to the switch and put it in the in port. then you can plug in your computers from there. now if you have anew er one and it is wire less you still will hav to run a wire to the router. unless you get a repeter then all you have to do is log onto your routher and then use it like your main router

hi my printer this problem. release the lock switch detach the usb cable and reconnect. scanner driver will be closed code: 2,179,10

Unfortunately, that's normal for this particular model. If you read the manual, or in this case the Quickstart Guide, you'll note that the top left corner is meant to go into the arrow corner. I'm annoyed with it too. You can always do it in Post-processing by doing two "turn image 90 degrees". If there would be a setting, it would be in the scanning program as the driver for this scanner has no settings available; you would have to check to see if there's a 'reverse image' setting in the program, though I doubt it.

Please follow below steps .

1. First, open the "Task Manager" by pressing Ctrl-Shift-Esc.
2. Then click on the "Services" tab and look for the stisvc service, that is, "Windows Image Acquisition (WIA)".
3. Look at the "PID" column and get the id of the related process.
4. Then go to the "Details" tab and look for the process with that id, which will be one out of the svchost.exe processes.
5. Click on that process by the right mouse button and select "End task".
6. Then go back to the "Services" tab and restart the WIA service by right-clicking on stisvc and selecting "Restart".

Hope it helps and my solution is helpful !

https://microsoftofficesupport.org/ you can read their blogs.

Power down the scanner and unplug the USB from your computer. Plug the USB back in and turn power back on. Occasionally USB connections lose their minds and quit working. Good luck. Semper Fi, Z

As a quick fix, if I could see it on the screen, it should be possible to save it to the drive taking note of what name you saved it as. If you then drag and drop the file onto your opened email, it should attach to the email. If it doesn't, you should be able to drill down to where the file is on the drive via the paperclip symbol. If the screen scan saves only as one page at a time, hopefully you can save each page as a PDF or convert what you do save to PDF. CutePDF or PrimoPdf may offer a driver for the conversion. There is a program called PDF binder (freeware) that does a great job of welding several pages into one file. Possibly the freeware program File Minimizer might reduce the file size. Yes, this is a time consuming work around but it gives you an option. I doubtlessly have cracked up some other helpers with this convoluted method but at least you have my "bear claws and stone tools" method.

The folder for saving temporary files must exist, and it might not by default. In MP Navigator EX check "Use the scanner driver" and then click "Open Scanner Driver". In the scanner driver window, click "Preferences" in the lower right. On the Scanner tab/page, set "Select Folder Where Temporary Files are Saved" to a place which exists