Canon CanoScan - Recent Questions, Troubleshooting & Support - Page 2

Well I had a code 15 error with mine LIDE 20. Apparently the scanner needs a certain amount of power to run off the USB port. So I changed the USB port and problem fixed

I had the same problem. Solved it by going into the "CanoScan Toolbox" - "Settings" - and pressing the "Defaults" button in that panel - and then "OK" button. Afterwards everything worked fine. Hope this helps you.

Go to Canon following this link

http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

And get your driver there.

you have to run wire from you main router to the switch and put it in the in port. then you can plug in your computers from there. now if you have anew er one and it is wire less you still will hav to run a wire to the router. unless you get a repeter then all you have to do is log onto your routher and then use it like your main router

Perhaps you have forgotten to unplug the scanner before scanning? That's what happened to me. I kept getting different error codes, 5,202,63 or 5,202,52 or 5,202,54 and also a message that the driver was not in the TWAIN folder. According to the help file the problem might have been due to my nfts file system. I also tried downloading various new drivers. Nothing helped until I noticed that I had not unplugged the scanner!

Do a "reset".
•Go into the CanoScan toolbox,
•click Settings,
•click the Defaults button on the bottom
•then click OK.
It will take a few seconds to reset and you should be good to go.

Canon CanoScan LiDE 80 Drivers
Please visit the above link from Canon Official. Select the Operating System (OS) you have on your PC and download the required drivers & software.

Hope it helps! Good Luck!
CreativeTECH

Please follow below steps .

1. First, open the "Task Manager" by pressing Ctrl-Shift-Esc.
2. Then click on the "Services" tab and look for the stisvc service, that is, "Windows Image Acquisition (WIA)".
3. Look at the "PID" column and get the id of the related process.
4. Then go to the "Details" tab and look for the process with that id, which will be one out of the svchost.exe processes.
5. Click on that process by the right mouse button and select "End task".
6. Then go back to the "Services" tab and restart the WIA service by right-clicking on stisvc and selecting "Restart".

Hope it helps and my solution is helpful !

In case you have a d646u you will found your driver here:

http://support-au.canon.com.au/EN/search?canonsearch=1&lang=EN&category=Scanners&series=Scanners+(Small+Office+-+Home+Office)&model=CanoScan+D646U+ex&menu=Download

LIDE 25 driver:
http://support-au.canon.com.au/EN/search?canonsearch=1&lang=EN&category=Scanners&series=Scanners+(Small+Office+-+Home+Office)&model=CanoScan+LiDE+25&menu=Download

https://microsoftofficesupport.org/ you can read their blogs.

Power down the scanner and unplug the USB from your computer. Plug the USB back in and turn power back on. Occasionally USB connections lose their minds and quit working. Good luck. Semper Fi, Z

https://www.canon.com.au/scanners/canoscan-lide-100/support?option=drivers Go to this site to download drivers for windows XP through 8.1. If you have a later OS you may find it is native or not supported.

As a quick fix, if I could see it on the screen, it should be possible to save it to the drive taking note of what name you saved it as. If you then drag and drop the file onto your opened email, it should attach to the email. If it doesn't, you should be able to drill down to where the file is on the drive via the paperclip symbol. If the screen scan saves only as one page at a time, hopefully you can save each page as a PDF or convert what you do save to PDF. CutePDF or PrimoPdf may offer a driver for the conversion. There is a program called PDF binder (freeware) that does a great job of welding several pages into one file. Possibly the freeware program File Minimizer might reduce the file size. Yes, this is a time consuming work around but it gives you an option. I doubtlessly have cracked up some other helpers with this convoluted method but at least you have my "bear claws and stone tools" method.

The folder for saving temporary files must exist, and it might not by default. In MP Navigator EX check "Use the scanner driver" and then click "Open Scanner Driver". In the scanner driver window, click "Preferences" in the lower right. On the Scanner tab/page, set "Select Folder Where Temporary Files are Saved" to a place which exists

Can you take a screen shot? or Try uninstall and re-install the scanner on your Mac

the cause is that usb cable supplies power to scanner(there is no power cable) and therefore can not be much long, plug the original cable from scanner directly to USB port in your PC and it will be working correctly. If you use additonal cable to connect scanner to your pc you wil get the error code

Hello friend,
You must open your scanner and gently wipe the glass screen down with a cloth.. this should remove all dirt and make a clear scan.

There does not seem to be a twain driver for Win7, but try this site: http://www.driverscape.com/download/canoscan-d660u

If you believe the scanner is still functional it is possible it won't operate with Windows 7. I have a laser printer like that and no updated drivers are available and in spite of using the Windows Compatibility function the printer is now useless. You could try uninstalling the scanner driver and restarting the computer and then when you reconnect your scanner a "found new hardware" wizard should appear which can search the internet for a suitable driver. You could also try using the Windows Compatibility function that in theory allows earlier software to be used - mostly unsuccessfully in my experience.

Hello! Please check the manual. Maybe you just need to update the scanner. https://manualsbrain.com/en/manuals/1795488/?page=10