Bushnell Optics - Recent Questions, Troubleshooting & Support
My Bushnell neo ghost wont pick up the satellite?
Just had this happen to me. I tried re-syncing, powering off and on, but no change. I finally opened the case up, popped out the circuit board and disconnected the battery . I let it stay off power for about 30 seconds. It only took about 1 minute to find the satellites! Let's see how long it lasts....
Used it yesterday. Found satellites in 15 seconds worked correctly for entire game. Rechecked today and still good.
on Nov 08, 2019
Change meters to yards Bushnell Tour v3 slope
UNIT OF MEASURE OPTIONS The YARDAGE PRO TOUR can be used to measure distances in yards or meters. The unit of measure indicators are located in the upper right portion of the LCD. To select between yards and meters, look through the monocular, depress the "mode" button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds. If you are changing from yards to meters, a change in unit of measure will be indicated by the illumination of the letter M for METER indicator while the YD for YARD indicator is turned off. If you are changing from meters to yards, the opposite will occur. Note: The YARDAGE PRO TOUR will return to the last setting used, each time the unit is turned on.
on Oct 22, 2019
Not finding what you are looking for?