Work Safety - Popular Questions, Answers, Tips & Manuals

maybe you should explain what it is first???

Work Safety | 559 views | 0 helpful votes

If you are referring to the damper in a standard fireplace, it should be pushed up to open it.

Work Safety | 414 views | 0 helpful votes

One of the causes of this is when your internet cable in plugged without an internet.
*Solution: restart comp without any internet coming in (in case if its your internet's fault).
Other causes are the capitalization of the letters.
*Check weather you pressed the right buttons and see if your letters where capitalized or not.

Work Safety | 790 views | 0 helpful votes

Gas lift chairs are made to automatically lock in the position they have been raised to, sounds like your chair is faulty.

Timberland... | 1,203 views | 0 helpful votes

Whats the Question. Here are the specs of what I think you are asking about.
SKU: CU-334E544C39 Smith & Wesson Safety Glasses 19855 This contoured design is complete with rubber grip temples for a more secure fit. Safety Glasses, Series Smith & Wesson(R) 38 Special, Gender Unisex, Lens Color Blue Mirror, Polarized Lens No, Lens Coating Scratch-Resistant, No Foam Lined, Eyewear Frame Design Wraparound, Eyewear Frame Style Full-Frame, Frame Color Chrome, Eyewear Size Universal, Frame Material Nylon, Lens Material Polycarbonate, Temple Color Chrome, Temple Style Ratchet Hinge, Photochromatic Lens No, Metal Detectable No, X-Ray Detectable No, UV Protection 99.99 Percent UVA/UVB, Standards ANSI Z87.1+ 2010

Jackson Smith &... | 869 views | 0 helpful votes

You will have to show receipt so they will know

Work Safety | 1,397 views | 0 helpful votes

They take random samples of the vest and test them to see if they meet the minimum standard for the classification required
The test is carried out at a set distance and calibre and a batch sample will be tested for handgun ,submachinegun , rifle and stab resistance
The projectile impacts the outer layer and gets slowed down and the other layers do the same and dissipate the force so all you hope to get is a bruise and fractured bones depending on vest type

Work Safety | 820 views | 0 helpful votes

Bill, The SKU number you list appears to be for a Jackson industrial mask and respirator. I'm wondering if the glasses you describe were part of a set. Kimberly clark sold thier product line to SureWerx so it is almost impossible to trace the orignial SKU.

Jackson Smith &... | 652 views | 0 helpful votes

Mostly no, if what you mean is will they keep your feet warm and dry. They are not water proof, unless specifically stated, and they are not adequately insulated. What you want are PAC boots, Heavy leather and rubber boots with a felt inner boot.

Work Safety | 871 views | 0 helpful votes

Yes, You can change.

Work Safety | 1,377 views | 0 helpful votes

Insert the pry bar above the alternator pulley. Apply gentle pressure upwards so that it adds tension to the drive belt. Once the drive belt is moved into its desired tension, tighten the adjustment bolt to lock the belt in place. Then, torque the adjustment bolt to the manufacturer's specifications.

West Chester... | 1,244 views | 0 helpful votes

Class 1 safety vests are for workers in low impact areas, where traffic flow does not exceed 25 mph and where personnel are working a good distance away from it. Parking service attendants, delivery vehicle drivers, and sidewalk or roadside maintenance workers are examples of jobs who would qualify for a class 1 safety vest. These vests should have a mandatory minimum of 155 square inches of reflective tape. Dimensions of the reflective tape can be either 6.46 linear feet of 2 inch tape or 9.39 linear feet of 1 3/8 inch tape. The reflective stripes should be around the middle in a 360? stripe and above each shoulder. Vests should be either a safety yellow or safety orange color.
Workers who are involved in jobs where there is heavier traffic are required to wear a Class 2 vest. Jobs that require workers to work in areas where there is poor visibility due to weather will also need a more reflective Class 2 safety vest. Class 2 vests will have a minimum of 201 square inches of reflective tape that is 2 inches in diameter. Dimensions of the reflective tape can be 8.373 linear feet of 2-inch tape or 12.2 linear feet of 1 3/3 inch tape. Examples of jobs that require Class 2 vests are airport baggage handlers and ground crew, forestry workers, high-volume parking or toll-gate personnel and law enforcement personnel. Reflective stripes will be over the shoulders and round the middle in either one or two 360? horizontal stripes.
Jobs that require workers to be the most visible are ones that put personnel in close contact with heavy traffic. High risk jobs include accident site investigators, emergency responders, railway workers, utility workers, and survey and flagging crews. These workers will often be close to traffic exceeding 50 miles an hour, so it is important for them to be as visible as possible. Class 3 safety vests and garments must have a minimum of 310 square inches of reflective tape that is 12.92 linear feet and 2-inches thick. Class 3 garments also provide more coverage to the arms and legs than do class 1 and class 2 safety vests.

Work Safety | 1,250 views | 0 helpful votes

Have you tried unlocking it?

Work Safety | 1,036 views | 0 helpful votes

mink oil. small jar only cost's about 5-8 dollars depending on where you find it. i bought my last jar at a Blue Seal. they make other oils but i was recommended this particular kind by a few others and was not disappointed. Caution: allow time to set before using after initial application. the material needs time to soak it in.
depending on how often you wear the boots the small jar should last you a good while.

Work Safety | 912 views | 0 helpful votes

Not finding what you are looking for?
Work Safety Logo

-112 questions posted

Ask a Question

Usually answered in minutes!

Top Work Safety Experts


Level 3 Expert

34190 Answers

Johan Erasmus
Johan Erasmus

Level 2 Expert

122 Answers

James Boyd

Level 1 Expert

5 Answers

Are you a Work Safety Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides