Welding Tools - Popular Questions, Answers, Tips & Manuals


bin it and get another one

Welding Tools | 26 views | 0 helpful votes


www.ebay.com
sulerpcb.com
Home Depot
Harbor freight tools.
Hope this helps

AMP Welding... | 24 views | 0 helpful votes


It has been my experience the best flat welding rod is 7024. It is easy to use and forgiving of contact sticking. It has a heavy coating making it easier to keep a consistant gap between rod and workpiece. I always liked 7018 for vertical welding. I hope this helps you out.

Lincoln Welding... | 17 views | 0 helpful votes


Matco would be a possible source.

Welding Tools | 26 views | 0 helpful votes


You'll need to re-structure this into question format and try again, otherwise no one understands what exactly you're trying to figure out.

Miller Welding... | 39 views | 0 helpful votes


The above reply is very good. If the contactor is buzzing, it will need to be blown out with high pressure air. When I was a welding repair shop manager, we washed every machine out with a pressure washer and then we blew the machine out with high pressure air. When dealing with high electronic machine, you have to avoid getting the electronics wet and high pressure air can damage circuits and wiring. Contractors are easily taken apart and cleaned. WARNING: Any work done on the inside of the machine should only be done with the machine unplugged or locked out. Good luck.

Welding Tools | 69 views | 1 helpful votes


Depending on what type of it is a self feeding there is a door on the side that should open up and a place where you put your spool of wire then you just feed the wire through the allotted spit and slowly squeeze the trigger to have it feed through you lead.

Welding Tools | 55 views | 0 helpful votes


Take it back it is defective.

Welding Tools | 59 views | 0 helpful votes


Check main fuses or circuit breaker. Also check plug and cord.

Miller Welding... | 62 views | 0 helpful votes


Request the parts list from Weller.

Weller Welding... | 68 views | 0 helpful votes


An old welding torch is not exactly valuable and I certainly wouldn't use it unless it is in excellent condition and I didn't have another more modern and much safer model, though if you have the complete kit you certainly have an interesting curiosity.

The complete kit comprises the gas mixing handle, the welding stem and a selection of jets or nozzles and usually a cutting stem and at least one cutting nozzle. There is usually a nice box and a set of jet cleaners to complete the set.

You might find the link below interesting...

https://www.google.com/search?rlz=1C1CAFB_enGB673GB676&sxsrf=ACYBGNQU05AnWg9PO63_HoTfe0gdDIwLQA%3A1568337788348&ei=fO96Xb_wFKXsxgOtmJBg&q=Craftman+welding+torch+model+624.54741+manual&oq=Craftman+welding+torch+model+624.54741+manual&gs_l=psy-ab.12...118195.122108..124492...0.0..0.120.778.0j7......0....1..gws-wiz.......33i21.WATyQIYCV_g&ved=0ahUKEwi_nozG0czkAhUltnEKHS0MBAwQ4dUDCAo

Welding Tools | 64 views | 0 helpful votes

Not finding what you are looking for?
Welding Tools Logo

6,701 questions posted

Ask a Question

Usually answered in minutes!

Top Welding Tools Experts

David Soto
David Soto

Level 2 Expert

414 Answers

Brad Brown

Level 3 Expert

18157 Answers

Bill Boyd

Level 3 Expert

53757 Answers

Are you a Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...