Watches - Page 4 - Recent Questions, Troubleshooting & Support


need instruction manual for Accutron Breckenridge 26B29 watch?

Watches | Answered on Dec 19, 2019


Took me a while, but I found the answer at the following link:
(Who knows, maybe I'll need it again next time I change my battery)

http://www.bulovaspecialmarkets.com/BulovaDynamicRepository/instructions/518.pdf

Accutron... | Answered on Dec 19, 2019


Google (brand)(T690)(manual) without parens to get instructions.

Watches | Answered on Dec 17, 2019


there usually is an AC contact point to reset digital watches. Touching the + and the ac point with a conductive wire usually resets the watch. Not sure about the spring- I'm not going to open my Tissot up unless I have to.

Tissot T-Touch... | Answered on Dec 16, 2019


I had the same problem and attempted what banjodoug suggested above. It did not help. I had a faint display even before I re-inserted it into my watch frame. I surmised it wasn't the battery position.

I then took apart the damn thing and put it back together several times, each time rushing to push the setting/center button only to derive the same problem over and over.

I then took it apart one more time and pinched in all of the sides of the metal frame that holds it all together, thinking that I had a bad ground. After I did that, I reassembed it and waited. The display came on with the test display and then eventually went to the standard display on its own and all was good to go.

I suspect the issue was solved by correcting an improper ground and a proper initialization process - both solved by the steps I took above.

Hope it works for you!

Polar F6 Wrist... | Answered on Dec 16, 2019


  • Defective "new" batteries
  • Incorrect installation

Watches | Answered on Dec 16, 2019


Hi,

The backplate is a "pry open" back. so you will need something like a blade or a hard thin flat object to pry the backplate. once this is done you will have access to the battery. Please note that there is a tiny Philips screw that holds the battery plate. you will have to remove this screw and then remove the battery plate. Also, note that around the case there will be a thin rubber "o" ring. this is what makes the watch water-resistant. so pls male sure you fix it back when you reinstall the watch.

Stainless... | Answered on Dec 16, 2019


Could be that you have bent the crown shaft.....easily done, see if anyone will service it for you, sadly, many eatchsmiths won't touch INVICTA

Invicta Watches | Answered on Dec 16, 2019


Google (tagital)(T1)(manual) without parens OR request directly from Tagital.

Watches | Answered on Dec 16, 2019


If you have to ask, or if you bought it online, it is a copy.

Look at some of these videos.

https://www.google.com/search?q=Gucci+watch+real+or+fake

Gucci Watches | Answered on Dec 16, 2019


Google (skechers)(SR5071)(manual) without parens.

The Watches | Answered on Dec 16, 2019


On the case back usually or user manual

Casio Watches | Answered on Dec 16, 2019

Not finding what you are looking for?
Watches Logo

59,677 questions posted

Ask a Question

Usually answered in minutes!

Top Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...