Video Game Consoles & Games - Recent Questions, Troubleshooting & Support
Cant play blue ray movie. wants to system update.
There are some firmwares that support playing movies on the game, if the files are not complete, then the ps3 will not be able to play any movie, and some times it might affect game discs as well.
So when next your playstation 3 wants to system update, allow it, so it will automatically restore the files that are necessary to play a blue ray disc.
Systems update is done online, so you must have an internet connection either wireless or by connection for the playstation, and if it pops up the system update message next time, allow it. It will install new firmwares for the playstation 3 and you will be able to enjoy better services on the game.
Take care and good luck
Hope this was helpful
13 minutes ago
I'm trying to watch a
there are series of problem in ps3 which
can be solved without much technical knowledge ........ your problem belong to
that so dont worry i will give you the link to download the ps3 repair
guide that will help you a lot....
click here to download repair guide
17 minutes ago
The screen says you must renew encryption key i
ok jump on google and type in latest update for ps3, download the update and copy it to a flash drive i.e usb stick and then type into google how to perform ps3 update with flash drive and select the search result that is posted by sony and it will guide you through the rest hope this helped
3 days ago
Can't put ANY disc in! White plastic piece blocking my way.
you will have to crack it open again like you did before, when you have the metal case and the top guide cover off you will see 4 little rollers , two on each side, these guide the disk in. .
(with the console front facing you) in th middle you will see the offending white stopper, DONT TRY AND FORCE IT DOWN !!! this will really bugger it up.
the problem is , the system thinks there is still a disc in there , so were gunna trick it o.k ?
to do this you need the system on. for the sake of your eyes put the round white cup with the magnet in it over the lens,magnet side up.
VERY IMPORTANT !!! do not touch anything other than i say.....zap!
turn it on and touch the sensor to load it up (hold the cover over it to locate it exactly)
in front of the right front roller you will see a white stick poking up that has its own little track it can travel around. gently guide that stick back , you should notice the system starting to read and all the rollers will slide open (you may have to help them a little (touch only the rollers)
when there all back , you system thinks theres a disc in , so press the eject sensor (line it up with the cover again)
watch with joy as the white stopper drops down.
3 days ago
Xbox 360 will not read games or dvd's
Wow, so many replies!
The open tray issue is normally linked to the laser itself. You do NOT have to replace the entire drive, as doing so may cause you further problems.
If your 360 is under warranty, send it in to be replaced.
If not, then there are things to try!
Open the console (using the various online tutorials) and remove the DVD-ROM drive. Open the drive and you'll have access to the laser. Get a Q-tip (cotton bud) and moisten one end with some boiled water. Rub gently over the lens of the laser, then use the other end to dry. Try the game again.
If the above doesn't work, purchase another drive assembly, matching what you already have. You could just buy the laser, but there's no point if it's something other than the laser (and you get one with a new drive). If you have a Hitachi drive, make sure you buy a Hitachi. The same with a Toshiba-Samsung. Keep the same drive type. New drives can be purchased from Ebay. For Toshiba Samsung's, either the MS25 or MS28 will be fine as the insides are exact. Hitachi's are likewise: any version will do.
Here's the good part: you don't need to mess with the firmware on your drive, since the problem is mechanical. Carefully remove the DVD logic board from your faulty drive (the circuit board inside the DVD-ROM itself) and get a Sharpie/Marker and tick it/sign it/etc. Something which you can distinguish one from the other. The boards will look the same and you don't want to mix them up!.
Set your board to one side and get your replacement drive. Open it up too and remove the board in the same way. Now put your board in this new drive, carefully replacing the cables (there are guides online for this too). Close the drive and try it.
Because you're keeping the PCB from your drive, your DVD key will match still and you won't have any configuration problems!
on Feb 14, 2020
Honedownloaded amovie to watch on
Cinavia is an anti-piracy protection embedded into the PS3 and it triggered by some codes in the audio track of the movie.
You cant play Cinavia protected movies on the Playstation 3 native player.
However If your Ps3 is jail-broken you can use a homebrew player to play those movies.
on Feb 14, 2020
How do i get rid of message code 3 ??????
Actucally, there are a few ways to bypass Cinavia, but no program can remove Cinavia. If your video is a homemade movie or other personal recording, to play your recording without muting you may either:
· Pause the video, wait 30 seconds for the audio to be un-muted, then skip over those portions where the professionally produced material is used and continue playing the rest of the video, or
· Pause the video, wait 30 seconds for the audio to be un-muted, then play video from a different optical disc for at least 10 minutes before continuing playback of this video.
on Feb 14, 2020
Not finding what you are looking for?