Tablets & eReaders - Page 6 - Recent Questions, Troubleshooting & Support


open the camera app and press the button that looks like a camera with two circular arrows.

That is dependent that it is a newer model with a front facing camera. Notice it says 'latest android tablet' :>)

Proscan's latest Android tablet includes a front facing camera allowing you to snap images, watch videos and video conference.

Proscan 7 Inch Android Internet Tablet Capacitive Touch Screen Android 4 1...

Tablets &... | Answered on Jan 08, 2020


1. Turn tablet off. You may need to use two hands in this process to press and hold buttons properly.


2. Turn on the tablet with power button, wait a full 2 seconds from the time the tablet starts showing the red Motorola logo, then press and hold the down Volume key. (you should not hold down the power button after it turns on and logo appears)


3. "Android Recovery" will appear on top of screen if timing is done correctly. Release volume button. (if you continue to press volume down at that message, the message will cycle through "RSD, Fastboot, and back to Android Recovery. Make sure message states Android Recovery before you go to next step). If stuck at a RSD protocol or Fast boot screen, reboot the tablet by holding power button then pressing the volume up).


4. While screen states "Android Recovery", Press volume up button, the screen will say "Entering Android recovery mode" and a few seconds later an Android robot graphic will appear alone on the screen. Release buttons.


5. Hold down power button and then press the volume up key together to see the Android Recovery screen menu selections.


6. Use the volume buttons to move up and down through selection in this menu.


7. Using the volume down button, scroll down to "Wipe data/factory reset"


8. Tap Power hard key to select option.


9. Scroll down to select "Yes, delete all user data".


10. Tap the power button to select. Wiping and formatting data will take a few minutes.


11. You will return back to the Android recovery screen menu.


12. Tap the Power button to "Reboot system now" which will power-cycle tablet and eventually power back on to the Initial Set-up / Welcome screen present when you first turned on your tablet

Tablets &... | Answered on Jan 08, 2020


Android tablet wifi authentication problem [Solved ...

www.tomshardware.com/.../43704-43-android-ta...

Tom's Hardware Guide
Nov 23, 2012 - 20 posts - ‎9 authors
Hello, every wireless device works except my new tablet from Acer running Android 4.1.1. ... Yes, I try to connect to the network router. ... You can hide the SSID - once your Android has it as a saved network it will ... gefraenk said: ... Hello all, I have the same authentication problem, worse, I m not sure what ...

Authentication Problem to Connect Android Tablet - YouTube

? 3:05
https://www.youtube.com/watch?v=2wul81jM7Ts
Apr 2, 2013 - Uploaded by Meroy Diniz
If you have Authentication Problem connecting you androidtablet. ... i got a different problem i cant even turn the wifi on, on my hudl 2 it blocked ...

Tablets &... | Answered on Jan 08, 2020


try clearing your cache partition, you can get to the android recovery with your buttons.
1. Turn tablet off. You may need to use two hands in this process to press and hold buttons properly.


2. Turn on the tablet with power button, wait a full 2 seconds from the time the tablet starts showing the red Motorola logo, then press and hold the down Volume key. (you should not hold down the power button after it turns on and logo appears)


3. "Android Recovery" will appear on top of screen if timing is done correctly. Release volume button. (if you continue to press volume down at that message, the message will cycle through "RSD, Fastboot, and back to Android Recovery. Make sure message states Android Recovery before you go to next step). If stuck at a RSD protocol or Fast boot screen, reboot the tablet by holding power button then pressing the volume up).


4. While screen states "Android Recovery", Press volume up button, the screen will say "Entering Android recovery mode" and a few seconds later an Android robot graphic will appear alone on the screen. Release buttons.


5. Hold down power button and then press the volume up key together to see the Android Recovery screen menu selections.


6. Use the volume buttons to move up and down through selection in this menu.


7. Using the volume down button, scroll down to "Wipe data/factory reset"


8. Tap Power hard key to select option.


9. Scroll down to select "Yes, delete all user data".


10. Tap the power button to select. Wiping and formatting data will take a few minutes.


11. You will return back to the Android recovery screen menu.


12. Tap the Power button to "Reboot system now" which will power-cycle tablet and eventually power back on to the Initial Set-up / Welcome screen present when you first turned on your tablet.

Tablets &... | Answered on Jan 08, 2020


If you have a 4.0 or Later operating system, Press and Hold the volume and power button down together.

3_19_2013_3_31_59_pm.jpg

Tablets &... | Answered on Jan 08, 2020


ihave a china android tab and it is now pattern locked

Tablets &... | Answered on Jan 08, 2020


You would have to root it and install a custom android OS. If there is not a custom root kit a generic one would have to be used. There us a very real possibility of "bricking" or rendering the tablet completely useless.

Tablets &... | Answered on Jan 08, 2020


no, absolutely not (only with an emulator, see 2nd link)
as Zeki-tablets use Android OS
- however many apps exist in iOS, Android or other versions
you need to check that with the built in Amazon App store
Ask Mama Reviews
iOS Emulator for Android APK Download Run iPhone Apps on Android Phone download-apple-apps-zeki-tablet-oawkhf2sylgpmq5puvpglfxy-3-0.jpg

Shopnbc Zeki 7"... | Answered on Jan 08, 2020


Tip & How-To about Miscellaneous
Pairing Bluetooth Devices
Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks.

Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is.

Roughly speaking though.

Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever.

With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically.

When the Android device recognises it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes).

Apple Tablets &... | Answered on Jan 07, 2020


Hi, I am not sure if you are asking about using an external keyboard or switching to the various onscreen keyboard types, so I will offer some help for both.
The HTG Guide to Using Bluetooth Keyboard with Your Android Device

Beginner guide to Android How to use Android Keyboard and provide Input
How to Change the Input Method for Android

I hope this helps.
I post on behalf of HP.

Tablets &... | Answered on Jan 07, 2020


Extract and get back data on a broken screen Samsung Galaxy

To fully retrieve data from Samsung Galaxy S6 broken screen, here is worthy software for you - Broken Android data Extraction. If your Samsung phone stays in broken screen, black screen, non-responsive screen, dead screen, or you can not touch it to operate, This Android Data Extraction has the ability to recover full data of yours like your contacts, text messages, pictures, videos, call history, WhatsApp messages, notes, calendars, Viber/Kik/Skype/Wechat messages or documents on a broken Samsung Galaxy S6/S5/S4.Samsung galaxy note 5/4/3.

LEARN MORE





Archos 7... | Answered on Jan 07, 2020


If you mean to connect your Archos to your Android device through Wi-Fi, than, yes, you can! But, only if your android device supports the tethering feature. For example if you have an Android 2.2 (Froyo) device than you go to Settings->>Wireless & networks->>Tethering & portable hotspot and tap "Portable Wi-Fi hotspot". From the Archos, go to the the Wi-Fi settings and connect to the network you've just created. If you do not have the tethering option available, you should find out if your carrier or device manufacturer has an update for the device. Hope it helps!

Dba Archos 5 160... | Answered on Jan 07, 2020


You have a sticky button. Clean it with a moderately wet soapy cloth with the switch pointing downwards. Leave a few minutes, repeat and dry it. If it was new at Christmas, send it back under warranty.

Tablets &... | Answered on Jan 06, 2020


To reboot an iPad just press and hold the power button on the top and wait until the power slide menu comes up with a restart option, then click it and be on your way!

Have a nice day!,
Owen

Tablets &... | Answered on Jan 06, 2020


Try to contact fb help and drop message there. FB will help you recovering your account.

Tablets &... | Answered on Jan 06, 2020

Not finding what you are looking for?
Tablets & eReaders Logo

60,243 questions posted

Ask a Question

Usually answered in minutes!

Top Tablets & eReaders Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Brad Brown

Level 3 Expert

18136 Answers

Are you a Tablet and eReader Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...