Optics - Recent Questions, Troubleshooting & Support
Simplehuman makeup mirror won't hold at any height. How can I repair it so that it once again is adjustable?
Easy fix. I simply took a small square piece of very thin cardboard / paper from the inside of a cigarette pack and used the ANGLE of the square so that the corner of it went in between the tube stem and the circular base.
They work on friction (guessing) but nevertheless it works perfectly at any height due to friction from thin card paper.
You can then tape it in place or put on the back side under the mirror neck assembly or color the paper or whatever other aesthetics aligns to your desideratum
ps.
I'm sure you could use index card or something similar ??
2/3/2024 6:12:22 PM •
The Optics
•
Answered
on Feb 03, 2024
Replacing canon 18x50 battery cover
I just broke the hinge pin while removing the old cover but found two wall Phillips had screws, under the rubber and was able to loosen the hinge enough to install new cover. Easy!
Rear view camera instalation
Mount the camera on the back and the monitor in the front. Run the necessary wires and connect it to the power supply.
Not finding what you are looking for?