Irons - Page 10 - Recent Questions, Troubleshooting & Support

0helpful
1answer

I have a Shift Portable Wrinkle-free Steamer for fabrics. I am missing the little blue cap at the top of the water reservoir. Can I order one?

See if there is a 1 800 number for where you ordered it and ask them.
9/23/2019 12:13:41 AM • Top Irons • Answered on Sep 23, 2019
0helpful
1answer

I have a Carestyle 5 Braun Iron which leaks water everytime I press the steam button?

A steam iron generally produces steam in use as the movement allows water in the reservoir to move around and small amounts will escape into the heated sole plate. The button to produce extra steam is mostly a small pump similar to those found in trigger sprays and hand soap bottle pumps and this is connected to the sole plate by a small-bore hose. It is far from unknown for one or more of the little hose(s) to become disconnected, often because of a limescale build up - even though the modern steam iron is advertised as needing only tap water, this is suitable only in soft water areas. Irons used in hard water areas tend to have a much shorter life so an alternative is advised. My description doesn't apply to every steam iron - in some older designs the extra steam button opened a valve in the bottom of the reservoir to allow water to gravity feed into the sole plate. Although almost exclusively found on irons from the premium end of the market they were a nightmare of rods and rubber seals no longer lasting or reliable than those with a cheap plastic pump. Clearly your iron needs dismantling and repairing if you can do this yourself, or replacing if you can't due to the disproportionately high repair shop cost. Some years ago my wife gave up on premium irons and began to buy the cheapest and was at first happy to replace them fairly often saying she found them no better or worse than the expensive ones. The first couple only lasted a couple of years each but the last one is now six or seven years old and still going strong.
9/22/2019 6:02:44 PM • Braun Irons • Answered on Sep 22, 2019
1helpful
1answer

Hi my Bosch steam iron is tripping my electric when I turn it on its brand-new anyone no what problem is ?

dead short in the iron or lead brand new , take it back for a new item under warranty
9/19/2019 7:09:39 PM • Bosch Irons • Answered on Sep 19, 2019
0helpful
2answers

How can I clean mineral deposits from Inax Bidet heat tank

Use a steam iron or coffee machine descaler powder or liquid.
9/19/2019 7:47:11 AM • Irons • Answered on Sep 19, 2019
0helpful
1answer

How to repair my Shark professional 1600 watt iron that wont turn on at home

it could be a bad connection, a bad switch or a bad heating element. It must be disassembled to determine what the problem is. You might look up your model on a parts site and see if they have a breakdown picture. If they do not and do not sell parts, you have your answer. They are considered throw aways.
9/14/2019 10:10:08 PM • Irons • Answered on Sep 14, 2019
0helpful
1answer

I have a T-FAL Avantis 100 iron. The bottom plate is discolored and the wire is split near the iron as the protector got damaged. Now there is a sporadic contact. Could I get a new bottom plate? Serg

sometimes the bottom plate can be cleaned. they make polish for that. Normally, it isn't replaceable. The iron will have to come apart to replace the wire. I would not use it until you do as the loose wire might contact the case and then what would you do. Light up?
9/14/2019 10:06:33 PM • Irons • Answered on Sep 14, 2019
0helpful
1answer

Red light flashing on the phillips stem iron

indicator
9/14/2019 7:40:54 PM • Irons • Answered on Sep 14, 2019
0helpful
1answer

Iliso iron will not retract

When cords won't retract, it's usually because they were pulled out too far, ie: past the red line on the cord. Retractable cords have a limit to how far they can be pulled out in order for the spring to be able to "rewind" them back. On products with retractable cords, they have a red line near the base of the cord to warn you to stop.
9/14/2019 12:57:35 PM • Irons • Answered on Sep 14, 2019
1helpful
1answer

I have 2 of your Reliable iron The 4000IS and the 5000IS I Would like to know where do I send them for repair

no you dont notify the manufacturer fixya doesnt sell products
9/9/2019 1:17:20 PM • Reliable Irons • Answered on Sep 09, 2019
81helpful
11answers

Plugged in, reset button is lit, won't go off

The problem is the thermostat (NC 150 C). A replacement is available at Digikey.com, item R2015025 (part no. 317-1468-ND) It's a simple replacement with the bottom removed.
8/21/2019 8:18:12 PM • Homedics PS-200... • Answered on Aug 21, 2019
0helpful
1answer

I bought a used Black and Decker Stoway Iron and it was missing the cap for the water reservoir. Can I get a replacement for it?

This is not possible easily. You may have to make it with a piece of nylon. A lath mechanic can do it.
8/21/2019 1:39:25 AM • Irons • Answered on Aug 21, 2019
0helpful
2answers

Why do people smoke

Managing unpleasant feelings such as stress, depression, loneliness, , and anxiety are some of the most common reasons why adults smoke. When you have a bad day, it can seem like cigarettes are your only friend. if you facing while quitting smoking then you can consult some good psychologist who can help you in this situation. https://www.lybrate.com/indore/psychologist smoking-f1pb01bv44sam2wdajdzieb0-2-0.png
7/13/2019 6:20:12 AM • Black & Decker... • Answered on Jul 13, 2019
1helpful
1answer

Hi. I have Russell Hobbs iron not getting hot but the power light is coming on but the iron not getting hot

Check may be the wire cable is cut off inside or cut off from the iron.. Be careful it could be bridging issue or the elements are no more in contact get in touch with the repairers
7/12/2019 10:53:41 AM • Russell Hobbs... • Answered on Jul 12, 2019
0helpful
1answer

Another Question:-Russell Hobbs Electric Iron cord Power Plug Fuse is blown every time it is swiched on.Pl advise.

It sounds like you may have a possible direct short inside the iron. I would suggest either take it to an electric appliance repair shop or return it as being defective. If the problem still exists have your electrical outlet checked by a professional electrician.
7/12/2019 5:23:50 AM • Irons • Answered on Jul 12, 2019
0helpful
1answer

My russell hobbs steam iron keeps blowing the electric

either take something off the circuit or upgrade your circuit breaker and wiring.
7/12/2019 5:04:03 AM • Russell Hobbs... • Answered on Jul 12, 2019
0helpful
1answer

My iron has stopped heating up although lights still flashing and stop to tell me it's heated but still cold

Soak the base in vinegar and water for two hours, shake it and see the junk come out. Repeat with fresh vinegar and water. Leave the iron in the airing cupboard overnight to dry out internal condensation. Next day half fill iron with vinegar and water leave two hours, empty. Plug in it will likely heat up again so put water in the iron and heat it up then unplug use the calc clean and shake it over the sink
6/20/2019 11:41:23 AM • Bosch TDA4622GB... • Answered on Jun 20, 2019
0helpful
1answer

Tefal pro express steam generator iron. When in use the handle gets really hot. I have to put a cloth around it to use. Help.

try to reduse the temperature setting first, if it still does the same then the thermal switch mechanism is not cutting off the switch at proper temperature
need to replace the thermal switch mechanism
6/19/2019 8:01:27 PM • Tefal Irons • Answered on Jun 19, 2019
Not finding what you are looking for?
Irons Logo

8,743 questions posted

Ask a Question

Usually answered in minutes!

Top Irons Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66832 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39362 Answers

Are you an Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...