Heavy Machinery - Page 4 - Recent Questions, Troubleshooting & Support

1helpful
1answer

New Holland 648 baler serial # 979959 date of manufacture?

The 648 was built between 1998 and 2001, your serial number shows to be a 1999 model. It could have been sold in a later year.
5/24/2022 11:03:26 PM • Heavy Machinery • Answered on May 24, 2022
0helpful
2answers

Replaced hydraulic line in New Holland L555 the bucket works fine but the boom doesn't work at all

check level and bleed the system
5/13/2022 2:40:49 AM • Heavy Machinery • Answered on May 13, 2022
0helpful
1answer

Just bought a used Troy-Bilt

Hi Ben,

Have a look at these tips:

http://www.fixya.com/support/r9118692-lawnmower_not_starting

They apply to lawnmowers but are valid for all 4-stroke engines.
5/10/2022 6:14:33 AM • Troy-Bilt 24"... • Answered on May 10, 2022
0helpful
1answer

Bobcat skid steer, auxiliary hydraulics not functioning properly.

There could be a few different issues at play here. First, check to make sure that there is nothing blocking the auxiliary hydraulics valves or lines. If everything is clear there, then the next step would be to check the pressure in the system. If the pressure is too low, that could be causing the problems you're seeing. Finally, if all of that looks good, it's possible that there is a problem with the electronic control module for the auxiliary hydraulics. That would need to be diagnosed and repaired by a qualified technician.
4/23/2022 4:22:33 PM • Heavy Machinery • Answered on Apr 23, 2022
0helpful
1answer

Bobcat T650. Why did gauges quit working?

Did you wash your engine?
4/7/2022 2:26:56 PM • Heavy Machinery • Answered on Apr 07, 2022
0helpful
1answer

Why won't my WNU 6555 Diesel Plate Tamper start without ether Easy Start?

Question edited for clarity and spelling (ether). Question moved from Cellphones category. Information on hard starting. https://www.google.com/search?q=WNU+6555+Diesel+Plate+Tamper+hard+starting ..
4/5/2022 1:27:13 AM • Heavy Machinery • Answered on Apr 05, 2022
1helpful
3answers

Bobcat 873 starts and runs good until you start working it and then it shuts off. I have changed the fuel filter and an inline filter that someone put in. What could cause this?

Look inside the fuel tank to see if anything is floating in it. I once had a piece of carbon paper inside one. It would start, idle all day but shut off when moved. The extra throttle along with movement caused that piece of paper to block fuel flow.
4/4/2022 1:29:29 AM • Heavy Machinery • Answered on Apr 04, 2022
0helpful
1answer

CAT 420F Backhoe operator air seat do not go up or down when using button.

check air pressure or leak
3/18/2022 6:33:38 PM • Heavy Machinery • Answered on Mar 18, 2022
0helpful
1answer

Husqvarna 40 222

there's a website that has all this information and manuals everything totally free there are many actually but I personally like few .. let me know if u need help thanks
2/21/2022 9:54:35 AM • Gardeners Supply... • Answered on Feb 21, 2022
0helpful
1answer

Yale forklift error code 524264-14

Here is the explanation, but no use whatsoever! DTC 524264-14 - TOSS/TISS Special Conditions https://www.forkliftplus.com/en/yale-hyster-forklift-error-codes/# This page says this sensor will fix it for $184 (for a $10 sensor)! https://store.intellaliftparts.com/p/580056272/580056272-transmission-sensor.html https://www.google.com/search?q=yale+forklift+error+code+524264-14 ..
2/19/2022 9:32:21 PM • Atlas YALE... • Answered on Feb 19, 2022
0helpful
1answer

How can I download service manual for case 580 G

Case is proprietary and wont allow any service information to be publicly released.
2/11/2022 9:14:27 PM • Heavy Machinery • Answered on Feb 11, 2022
1helpful
1answer

Can you tell me where is the fuse/fuse box located on a Scat Track skid steer?

In the cab under the left window around knee position towards the windscreen is a a covered box that's it.
2/11/2022 2:38:23 PM • Heavy Machinery • Answered on Feb 11, 2022
0helpful
1answer

Bobcat s770 has an error code m6604 . what can i do to fix it?

I encountered error code m6604 on bobcat t770 and the FAQ of this page helped me. https://www.e-machinery.net/machinery/bobcat-t770/
2/3/2022 1:31:11 PM • Heavy Machinery • Answered on Feb 03, 2022
0helpful
1answer
0helpful
1answer

I have a kobleco sk135sr and when I slew it's clunky what would be the problem?

This is a tracked excavator and too specialised for us. Plus we are in North America and this is for the Asian market. If I were to guess, I would say failing bearings on the tracks, or worn/broken track teeth. Contact the maker direct. Their service department will know.

Southeast Asia SK135SR[LC] - Kobelco Construction Machinery

https://www.kobelcocm-global.com > SK135SRLC-2_mic Global Official Website of Kobelco Construction Machinery,a leading ... SK135SR[LC]-2. Unit : mm. Main Specifications. Machine Type, SK135SR, SK135SRLC ...
1/6/2022 5:28:26 PM • Heavy Machinery • Answered on Jan 06, 2022
Not finding what you are looking for?
Heavy Machinery Logo

1,647 questions posted

Ask a Question

Usually answered in minutes!

Top Heavy Machinery Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66835 Answers

Dmitry Isayev
Dmitry Isayev

Level 2 Expert

129 Answers

Are you a Heavy Machinery Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...